Once the silkworms complete spinning their cocoons on the mountage, the next critical task is getting those cocoons off safely and efficiently. Harvesting the cocoons from the mountage is not just about speed – it directly affects cocoon quality, reeling performance, and ultimately the income a sericulture farmer receives at the market. The method you use to harvest depends almost entirely on the type of mountage the silkworms spun their cocoons on. Understanding each method, along with the importance of mountage cleaning and the role of modern machinery, can mean the difference between a clean, premium-grade harvest and one full of stained, damaged cocoons that fetch lower prices.

Table of Contents

Why the harvesting method depends on the mountage

Different mountages – the structures on which silkworms spin their cocoons – have different physical designs, and those designs dictate how cocoons can be safely removed. What works for a flexible bamboo spiral won’t work for a rigid cardboard frame with individual cells. The method of harvesting silk cocoons varies depending on the mountage used during spinning. Before any cocoons are removed, however, there is one non-negotiable preparatory step regardless of mountage type.

Cleaning the mountage before harvest

Before harvesting begins, the mountage must be cleared of debris. Dead or un-spun larvae, naked pupae (worms that failed to spin), flimsy cocoons, and leftover leaf litter should all be removed first. This matters because flimsy and melted cocoons left on the mountage can spoil the good cocoons around them through staining. A stained cocoon is one whose pupa has died prematurely, and the decomposing fluid discolors the silk shell, making it unfit for quality reeling. Cleaning the mountage is therefore not a formality – it is a direct quality-control step.

Harvesting from spiral bamboo mountages (Chandrika)

The Chandrika is a spiral bamboo mountage made from a bamboo mat of approximately 1.8 m ร— 1.2 m, on which a bamboo tape wound in a spiral pattern creates a series of V-shaped ridges and compartments where silkworms spin. Chandrika is the most common mountage used in South India and West Bengal, and can accommodate around 1,000 to 1,100 silkworms per unit. Its open spiral design makes harvesting relatively straightforward.

Cocoons are harvested from the Chandrika entirely by hand. The worker simply moves their fingers in between the ridges of the spiral, gently detaching each cocoon. The open structure allows easy access to most cocoons without the need for any tool. The tactile, hands-on nature of this method also allows experienced harvesters to reject defective cocoons on the spot. The primary drawback is that it is labour-intensive, particularly on large farms with many mountages to process. Chandrika is easy to handle and repairable, but bamboo being a protected plant, it has become increasingly rare and costly – a factor driving the shift toward plastic alternatives.

Harvesting from plastic collapsible mountages

Plastic collapsible mountages share a broadly similar design concept to the Chandrika but are made from plastic instead of bamboo. Like the Chandrika, cocoons formed on plastic collapsible mountages are also harvested by hand. Workers slide their fingers along the corrugated ridges to pop the cocoons free. The plastic surface tends to hold cocoons with slightly different adhesion properties compared to bamboo, but the manual technique remains essentially the same.

Plastic collapsible mountages are more durable, easier to clean, and not prone to rodent attack, making them a practical long-term investment. However, the cocoons they produce can sometimes be more flimsy and less uniform in size compared to those from bamboo Chandrika – a trade-off that rearers must weigh when choosing their mountage system.

Harvesting from rotary cardboard mountages

Rotary cardboard mountages, also known as revolving mountages, are a completely different design. These mountages consist of a wooden frame with multiple cardboard sections containing individual cell-like holes, where each silkworm spins its cocoon in a separate compartment. In revolving mountages, each worm gets a cubicle to spin a cocoon, which makes them excellent for producing uniform, well-shaped cocoons.

Because of this compartmentalised design, removing cocoons by hand alone is inefficient and impractical at scale. Instead, a wooden harvester is used. This is a tool fitted with wooden pegs that align precisely with the holes in the cardboard mountage. After removing dead worms and defective cocoons, the cardboard mountage is fixed onto the harvester. The wooden pusher is placed over the holes and pushed gently, causing the cocoons to be ejected cleanly from their compartments. Steps of harvesting from cardboard mountages using the wooden pusher tool allow for faster and more consistent results than attempting manual removal cell by cell.

Mechanical harvesters for large-scale operations

As sericulture has scaled up commercially, manual harvesting across large volumes of mountages becomes a bottleneck. To address this, mechanical cocoon harvesters have been developed. Both manual pedal-operated and motorised types of cocoon harvesters are available in India, developed to improve efficiency in large-scale rearing operations. These machines use mechanical action to separate cocoons from mountages consistently, reducing the dependence on skilled manual labour and speeding up the overall post-spinning workflow. In a country where labour accounts for 65-70% of cocoon production costs in India, mechanising harvest operations carries significant economic advantages for commercial sericulture farmers.

Deflossing: the step that follows harvest

Once cocoons are harvested, they are covered in an outer layer of loose, tangled silk fibre called floss. Floss is produced during the initial hammock phase of spinning, before the worm starts forming the compact cocoon shell proper. It is unreelable and must be removed before the cocoons go to the reeling unit or to egg production. This removal process is called deflossing.

Manual vs. machine deflossing

Deflossing can be done manually, but it is time-consuming and labour-intensive. On average, a person can manually defloss around 20 kg of cocoons per hour. Mechanised deflossing machines can process between 50 and 100 kg of cocoons per hour, or up to 400-800 kg in a standard 8-hour working day. Both hand-operated deflossers (suited for small rearers) and motorised deflossers (suited for medium to large-scale operations) have been developed, primarily by the Central Sericultural Research and Training Institute (CSRTI), Mysore. The cost savings are substantial – machine deflossing is estimated to be around 40 to 50 times cheaper than manual deflossing.

Why deflossing matters for marketing

Beyond efficiency, deflossing has a direct impact on the price a farmer receives at the cocoon market. Deflossed cocoons fetch a higher price in the market because buyers can assess quality and silk content more quickly. When the floss layer is present, it obscures the true shell of the cocoon, making quality grading difficult. Removing it allows buyers – typically silk reelers – to evaluate shell ratio, compactness, and uniformity at a glance. Deflossing is also a prerequisite for silkworm egg production, where accurate quality assessment of individual cocoons is essential.

Timing is everything

Regardless of the harvesting method used, harvesting takes place 6 to 8 days after mounting. Harvesting too early is problematic: if pupation is not complete, the delicate pupa inside can be damaged during handling, transportation, or deflossing. Harvesting too late poses a different risk – the emerging adult moth will bore through the cocoon wall, breaking the continuous silk filament and rendering the cocoon useless for reeling. After harvest, the workflow must continue without delay. Immediately after harvest, cocoons should be deflossed, sorted, and weighed before being labelled with details such as race or combination, date of spinning, and green weight for market.

What do you think? Given that the harvesting method is dictated by the mountage type, how should a small-scale sericulture farmer weigh the long-term cost benefits of switching from bamboo Chandrika to plastic collapsible mountages? And as deflossing machines become more accessible and cost-effective, what barriers still prevent smallholder rearers in India from adopting them widely?

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.proagrimedia.com/livestock/from-silkworms-to-silk-garments-part-3-silk-harvesting/
  2. https://egyankosh.ac.in/bitstream/123456789/9174/1/Unit-1.pdf
  3. https://hbmahesh.weebly.com/uploads/3/4/2/2/3422804/cocoon_spinning_and_harvestting.pdf
  4. https://www.notesonzoology.com/sericulture/mountage-meaning-and-types-sericulture/200
  5. https://hbmahesh.weebly.com/uploads/3/4/2/2/3422804/spinning_and_harvesting.pdf
  6. https://nrdcindia.com/TechnologyLists/9
  7. https://slideshare.net/suresharjunan/mechanisation-in-sericulture
  8. https://nrdcindia.com/technologyDetals/258/COCOON%20DEFLOSSING%20MACHINE

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Silkworm Rearing

1 Types of Silkworms

  1. Life History of Mulberry Silkworm
  2. Growth Stages of Mulberry Silkworm
  3. Classification of Silkworm
  4. Non-mulberry Silkworm Insects

2 Pre-requisites for Rearing

  1. Selection of Silkworm Breeds for Rearing
  2. Estimation of Mulberry Leaf Yield and Assessment of Leaf Quality
  3. Estimation of Brushing Capacity
  4. Requirements of Rearing
  5. Disinfecting Silkworm Rearing House and Appliances

3 Silkworm Rearing House

  1. Characteristics of Rearing House
  2. Selection of Site
  3. Accommodation for Different Activities in Rearing

4 Egg Handling

  1. Pre-incubation Care of Silkworm Eggs
  2. Incubation
  3. Black Boxing
  4. Hatching
  5. Brushing of Larvae

5 Chawki Rearing

  1. Characteristics of Chawki Worms and their Rearing
  2. Leaf Quality for Chawki Rearing
  3. Chawki Rearing Practices
  4. Commercial Chawki Rearing
  5. Transportation of Chawki Worms

6 Late Age Silkworm Rearing

  1. Characteristics of Late Age Silkworms
  2. Rearing Methods
  3. Environmental Conditions for Silkworm Rearing
  4. Leaf Harvest, Transportation and Preservation
  5. Leaf Quality and Quantity
  6. Late Age Rearing
  7. Mechanization in Silkworm Rearing

7 Non-mulberry Silkworm Rearing

  1. Tasar Silkworm Rearing
  2. Oak Tasar Silkworm Rearing
  3. Eri Silkworm Rearing
  4. Muga Silkworm Rearing

8 Harvesting and Marketing of Cocoons

  1. Time of Harvest
  2. Methods of Harvest
  3. Deflossing
  4. Sorting of Cocoons
  5. Assessment of Cocoons
  6. Transportation and Marketing of Cocoons

9 Economics of Different Scales of Rearing and Cost Benefit ratio

  1. Meaning of Cost
  2. Classification of Costs
  3. Break-even Analysis
  4. Cost of Cocoon Production
  5. Economies of Scale