Among all the silkworms used in sericulture, the eri silkworm (Samia ricini) holds a unique position – it is the only fully domesticated non-mulberry silkworm. Unlike tasar or muga silkworms, which are reared outdoors on forest trees, eri silkworms are raised entirely indoors and depend completely on human care for their survival. This makes the rearing process more predictable, manageable, and accessible – especially for small-scale farmers and tribal communities across Northeast India. If you’re looking to understand how eri silkworm rearing actually works from egg to cocoon, this post walks you through each step clearly.

Table of Contents

What makes eri silkworms different

Eri culture is a traditional agro-based small-scale industry, primarily practiced in the Brahmaputra valley of Assam and other northeastern states. The eri silkworm is multivoltine, meaning it produces multiple generations in a year without going into seasonal dormancy. Eri silkworms are continuously brooded and their life cycle continues without regard to seasons, which is a significant advantage for consistent, year-round production.

Another distinctive quality is that eri silk is often called “peace silk” because the cocoons are open-ended – the pupa is removed without killing it, and the silk is spun rather than reeled. This makes eri rearing ethically appealing and sustainable. Both the cocoon and the pupa have market value – eri pupae are also consumed as a protein-rich food, particularly among tribal communities in Assam.

Host plants for eri silkworm rearing

The choice of food plant directly affects larval growth, silk quality, and overall yield. The eri silkworm is polyphagous and feeds primarily on castor (Ricinus communis), with kesseru (Heteropanax fragrans) serving as another major perennial food plant. Alternative hosts include payam (Evodia fraxinifolia), tapioca (Manihot esculenta), and a few others.

Castor is the most preferred primary host. The non-bloomy red variety NBR-1 has been found promising in terms of growth, yield, and palatability and is recommended for eri rearing. High leaf-yielding varieties like NBG, Kalpi-6, DCH-177, and GCH-4 are also suitable. Castor leaves can be harvested up to four times a year in Northeast India, providing a steady supply throughout rearing seasons.

Kesseru is a perennial plant especially valued because it provides leaves year-round. Kesseru can be harvested three times a year and is propagated through seeds, with pollarding done at 1.75 m height after three years to maintain leaf production. Having both castor and kesseru available gives farmers flexibility when one crop is not in season.

Preparing the rearing house

Since eri silkworms are reared entirely indoors, the rearing house setup is critical. A plinth area of 10 m ร— 5 m with tin or thatch roofing and a 1.5 m veranda all around is considered ideal for accommodating 100 disease-free layings (dfls) per crop. The house must be well-ventilated and fly-proof.

Disinfection before and after every rearing batch is one of the most important hygiene practices. Rearing appliances should be washed with 5% bleaching powder solution, and fumigation with 5% formaldehyde solution under high humidity is recommended, with the room opened after 24 hours for aeration. This step significantly reduces the risk of disease outbreaks that could wipe out an entire batch.

Egg incubation and hatching

The rearing cycle begins with disease-free layings (dfls) – batches of eggs laid by healthy adult moths. Eggs are incubated by spreading them uniformly inside egg boxes in thin layers, maintained at 24-26ยฐC and 80-90% relative humidity. The color of the egg is a key indicator of development – the egg changes to dark blue about two days before hatching, signaling that they are ready to emerge.

Hatching typically takes place in the morning after ten days of incubation, and the newly hatched larvae are yellow with black segments. Before handling eggs or larvae, hands must be washed with 2% formalin solution to prevent contamination.

Brushing the young larvae

Once hatched, young larvae are carefully transferred to rearing trays in a process called brushing. Newly hatched worms are brushed onto tender leaves – preferably castor – during the morning hours, using paraffin paper and a water-soaked foam pad in the rearing tray to maintain temperature and humidity.

Crowding must be avoided at this early stage. Young eri larvae tend to feed better in groups, but overcrowding can lead to disease spread and uneven growth. Tender leaves are essential for first instar worms – their mouthparts are not strong enough to handle mature leaves at this stage.

Tray rearing vs. bunch rearing

There are two primary methods for rearing eri silkworms, each suited to different scales of operation.

Tray rearing method

In this method, worms are fed on leaves spread across trays made of bamboo or wood. For young age larvae (I-III instars), wooden trays of 50 cm ร— 60 cm ร— 5 cm or bamboo trays of 70 cm diameter are recommended. Trays are typically stacked in racks to use vertical space efficiently. This method allows better control over hygiene, easier monitoring of individual larvae, and more systematic feeding – making it the preferred choice for commercial-scale rearing.

Bunch rearing method

In bunch rearing, 10-12 leaves of castor or branches of kesseru are tied together to form a bundle and hung vertically on a horizontal bamboo pole, wire, or string support. This is the traditional method practiced by communities like the Bodos of Assam, where approximately 15-20 leaves or branches are bundled together. Bunch rearing requires lower investment and simpler setup, making it well-suited to small-scale or household-level rearing.

Feeding management across instars

Eri silkworms pass through five instar stages, separated by four moults. The type and maturity of leaves fed to the worms changes with each stage. First instar worms are fed tender leaves, third and fourth instar worms receive semi-matured leaves, and fifth instar worms are given fully matured leaves – with a minimum feeding frequency of four times per day.

A mature fifth instar larva can consume a significant quantity of leaves daily. A full-grown larva can eat approximately 500-750 grams of castor leaves in a single day. Consistent and timely feeding is therefore critical to healthy larval development and ultimately to cocoon quality.

Managing moults carefully

Moulting is one of the most sensitive phases in eri silkworm rearing. Eri silkworms shed their skin four times during the entire larval period. During this period, worms rest without eating or moving, and the rearing bed should not be cleaned – worms must be left completely undisturbed.

The rearing room should be kept well-ventilated and the rearing bed relatively dry during moults. When 95% of the larvae have come out of moulting, fresh feeding should be resumed. Disturbing worms during moult can cause injury, failed ecdysis, or significant mortality – so patience and observation during this phase are key.

Late-age rearing on bamboo platforms

As larvae grow into the late stages (fourth and fifth instar), they become too large and numerous for standard trays. This is when bamboo platform rearing becomes practical. Low-cost bamboo platform structures are the best equipment for rearing late-stage worms, given the limited rearing space and the need for frequent bed cleaning. A structure with dimensions of 6 ft (L) ร— 5.5 ft (H) ร— 3 ft (W) can accommodate 25-30 dfls.

Bed cleaning becomes a daily requirement at this stage because of the increased volume of excreta and leftover leaves. Allowing waste to accumulate creates humid, disease-prone conditions that can quickly compromise the crop.

Identifying ripe worms and mounting

As the fifth instar larvae approach the end of their feeding phase, they display clear visual cues that they are ready to spin cocoons. Ripe worms become yellowish-white and start wandering around in search of a suitable site for cocoon formation. At this stage, the mature worms are picked up and transferred to mountages called “chandrikas” – structures of bundled dry leaves or straw where worms spin their cocoons. If silkworms are disturbed during cocoon formation, they may stop spinning, resulting in poor-quality cocoons.

Eri cocoons are characteristically open at one end, which is what allows pupa removal without killing the insect. Cocoon formation takes approximately 6 to 7 days to complete.

Harvesting cocoons and extracting pupae

Cocoon harvesting in eri culture differs from mulberry silkworm practices because the open-ended cocoon design allows pupae to be extracted without stifling. After completion of pupation, eri cocoons are harvested by carefully removing them from the chandrikas or dry leaves. Double, melted, flimsy, and poor cocoons are discarded, and good cocoons – compact, properly shaped, with higher shell content – are selected.

Quality benchmarks are clear: female eri cocoon weight should be 3.0 g and above, while male cocoon weight should be 2.5 g and above to be considered suitable. Research has shown that the choice of castor genotype significantly influences rearing performance, including cocoon shell weight and silk ratio – underlining the importance of using recommended castor varieties.

Yield from eri silkworm rearing

Eri silkworm rearing is known for being relatively productive with modest inputs. The recommended peak seasons for eri rearing are March-April and September-October, when temperatures and humidity are optimal. The average cocoon yield from 100 disease-free layings typically ranges from 8 to 10 kg. Several factors determine whether a farmer achieves this benchmark – the quality of eggs sourced, the nutritional value of the host plant leaves, consistency in environmental management, and adherence to disease prevention and sanitation protocols.

Because eri silkworms are hardy and manageable compared to other non-mulberry silkworms, even small-scale farmers can achieve reliable yields with disciplined rearing practices. The eri silkworm offers significant advantages for production, including low costs, simple feeding requirements, rapid reproduction, and strong disease resistance – making ericulture one of the more accessible entry points into sericulture for farming communities.

What do you think? Given that eri silkworm rearing requires relatively low investment and the silk has growing demand as a sustainable, ethical fabric – what do you think are the biggest barriers preventing more small-scale farmers from adopting ericulture? And with both the cocoon and the pupa having market value, how could eri culture be better integrated into rural livelihood programs?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.notesonzoology.com/sericulture/life-cycle-of-various-silk-moths/323
  2. https://www.krishisewa.com/articles/production-technology/251-eri-host-castor.html
  3. https://www.wormspit.com/erisilkworms.htm
  4. https://www.jetir.org/papers/JETIR2402004.pdf
  5. https://cmerti.res.in/faq/
  6. https://silks.csb.gov.in/kamrup/rearing-of-eri-silkworm/
  7. https://www.shivajicollege.ac.in/sPanel/uploads/econtent/c0b02104a0b4838dd778953f485f4c3f.pdf
  8. https://ahimsaerisilk.com/lifecycle/
  9. https://scialert.net/fulltext/?doi=je.2014.25.33
  10. https://pmc.ncbi.nlm.nih.gov/articles/PMC12386987/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Silkworm Rearing

1 Types of Silkworms

  1. Life History of Mulberry Silkworm
  2. Growth Stages of Mulberry Silkworm
  3. Classification of Silkworm
  4. Non-mulberry Silkworm Insects

2 Pre-requisites for Rearing

  1. Selection of Silkworm Breeds for Rearing
  2. Estimation of Mulberry Leaf Yield and Assessment of Leaf Quality
  3. Estimation of Brushing Capacity
  4. Requirements of Rearing
  5. Disinfecting Silkworm Rearing House and Appliances

3 Silkworm Rearing House

  1. Characteristics of Rearing House
  2. Selection of Site
  3. Accommodation for Different Activities in Rearing

4 Egg Handling

  1. Pre-incubation Care of Silkworm Eggs
  2. Incubation
  3. Black Boxing
  4. Hatching
  5. Brushing of Larvae

5 Chawki Rearing

  1. Characteristics of Chawki Worms and their Rearing
  2. Leaf Quality for Chawki Rearing
  3. Chawki Rearing Practices
  4. Commercial Chawki Rearing
  5. Transportation of Chawki Worms

6 Late Age Silkworm Rearing

  1. Characteristics of Late Age Silkworms
  2. Rearing Methods
  3. Environmental Conditions for Silkworm Rearing
  4. Leaf Harvest, Transportation and Preservation
  5. Leaf Quality and Quantity
  6. Late Age Rearing
  7. Mechanization in Silkworm Rearing

7 Non-mulberry Silkworm Rearing

  1. Tasar Silkworm Rearing
  2. Oak Tasar Silkworm Rearing
  3. Eri Silkworm Rearing
  4. Muga Silkworm Rearing

8 Harvesting and Marketing of Cocoons

  1. Time of Harvest
  2. Methods of Harvest
  3. Deflossing
  4. Sorting of Cocoons
  5. Assessment of Cocoons
  6. Transportation and Marketing of Cocoons

9 Economics of Different Scales of Rearing and Cost Benefit ratio

  1. Meaning of Cost
  2. Classification of Costs
  3. Break-even Analysis
  4. Cost of Cocoon Production
  5. Economies of Scale