When a maize kernel enters a dry milling plant, it does not come out as a single product. The milling process breaks the kernel into its distinct anatomical parts – the endosperm, germ, and pericarp – and then systematically separates and classifies these parts into a range of commercial products. Each fraction has its own particle size, composition, and set of end uses. Understanding what comes out of a maize mill, and why each product matters, is essential to appreciating how deeply this one crop is embedded in food manufacturing, animal nutrition, and beverage production worldwide.

Table of Contents

How maize milling works: the foundation

Before looking at individual products, it helps to understand the basic principle. Dry milling of maize separates the grain into four distinct physical components: the germ, flour, fine grits, and coarse grits. The process starts with cleaning and tempering – the grain is moistened to around 18-24% moisture to toughen the germ and make separation easier. A degerminator then mechanically breaks the kernel apart. The resulting material goes through sieving, aspiration, and gravity separation to isolate the germ from the starchy endosperm pieces. Those endosperm pieces are then classified by size into the various commercial fractions we look at below.

The primary objective throughout is to produce the maximum yield of clean, low-fat endosperm fractions. According to ScienceDirect, when properly degerminated, the larger grit fractions will contain as little as 0.45-0.55% oil – a critical quality parameter, since residual germ oil causes rancidity and shortens shelf life.

Food-grade grits

Food-grade grits are among the most commercially significant products recovered from the mill. They are coarsely ground particles of vitreous endosperm, produced after germ and pericarp removal. The largest endosperm fragments – called flaking grits – are the most valued fraction. These large grits are the key input for flaked ready-to-eat breakfast cereals, where they are cooked to gelatinize the starch, then passed through hot rollers to form flakes, which are finally toasted to develop color and flavor.

Characteristics and quality standards

Food-grade grits must meet strict physical and chemical criteria. Particle size must be uniform – inconsistent sizing causes uneven cooking and poor texture in the finished product. Moisture content is tightly controlled to prevent microbial spoilage and oxidative rancidity during storage. Fat content must remain low, as maize grits are low in fiber and contain less than 1% oil in well-degerminated fractions. Purity – the absence of bran fragments, germ residues, or foreign material – is equally critical, particularly for retail food applications.

In India, the Food Safety and Standards Authority of India (FSSAI) specifies that dried maize grain should not exceed 16% moisture and must meet defined limits on foreign matter, mineral matter, and uric acid content – standards that cascade down to the milled fractions derived from compliant grain.

Food applications

Beyond breakfast cereals, food-grade grits are widely used in the snack food industry. Corn meal or grits processed through extrusion cooking and puffing produce the maize curls, puffs, and balls familiar as packaged snack foods. The shape comes from the extrusion die; the puff expansion comes from the sudden pressure drop as the material exits the barrel. Grits are also used in baking – added to bread doughs and crusts to contribute texture. In the United States, cooked grits consumed as a breakfast side dish represent a significant direct food use, particularly in the South, where three-quarters of all grits sold in the country are purchased.

Soji (maize semolina)

Soji – known in Hindi as sooji or suji – refers to coarsely milled endosperm particles with a granular texture, analogous to wheat semolina. In the maize milling context, it occupies a size range between food-grade grits and flour. Maize semolina is produced from the endosperm of the maize kernel, ground into coarser particles rather than a fine powder, retaining a gritty texture that affects how foods made with it cook and feel. Its color ranges from white to yellow depending on the maize variety used, and it carries a mild, slightly nutty flavor.

Quality standards for soji

Like food-grade grits, soji requires controlled moisture content, high purity, and consistent granule size distribution. Uniform particle size is essential – particles that are too fine congregate in pockets during hydration, producing uneven textures in the cooked product. Color uniformity and absence of bran specks are also important markers of quality, since visible contamination signals inadequate separation during milling.

Applications of soji

Maize soji is used in the production of traditional dishes including porridges and puddings. It is widely used in the extruded snack food industry, breweries, breakfast cereals, confectionery, and baking applications. In baking, extruded or pregelled maize semolina offers greater water-binding capacity – which extends freshness – and the high shear stability it provides improves dough machinability. Polenta, the classic Italian dish, is essentially cooked maize semolina, and maize semolina is also suitable for making porridge, pasta, and other baked dishes where a slightly coarser texture is desirable.

Maize flour

Maize flour is the finest fraction recovered from dry milling – a low-fat, powdery product produced by further roller milling of smaller grit or meal fractions. Corn flour is composed predominantly of endosperm, which generally contains 75-87% starch and 6-8% protein. Because the proteins in maize do not form gluten, maize flour is inherently gluten-free – a property that has driven substantial growth in its use for specialist food applications.

Characteristics and quality standards

As the particle size of dry-milled maize products decreases, the residual oil content increases – flour fractions contain approximately 1.5-2.5% oil, compared to less than 0.55% in the larger flaking grits. This makes moisture and fat management during storage especially important for flour. Quality standards require a fine, uniform particle size; controlled moisture; freedom from foreign material; and in commercial trade, compliance with mycotoxin limits for aflatoxin and other contaminants.

Food and industrial applications

Maize flour is used for breadmaking in Latin America, in pancake mixes, infant foods, biscuits, and wafers. Its lower cost relative to wheat flour makes it a practical choice for applications where gluten strength is not required. It is used as a coating and breading for fried foods – its high starch content and low moisture absorption create a crisp, golden crust on fried chicken, fish fillets, shrimp, and vegetable fritters. Maize flour blended with wheat semolina is also used in pasta manufacturing. Beyond food, dry-milled maize products have nonfood uses including the manufacture of gypsum board, plywood, chemical binders, and biodegradable plastic fillers.

Feed-grade grits

Not all endosperm fractions from maize milling meet the purity or particle size standards required for human food. These lower-grade fractions – along with the germ meal and pericarp fiber recovered during degermination – are collected and processed into feed-grade products. The defatted germ meal is most often combined with the pericarp fraction to produce an animal food product known as hominy feed. Because the mechanical separation processes used in dry milling are imprecise, the germ and pericarp fractions often carry significant amounts of attached endosperm starch, which adds energy value to the animal feed.

Characteristics and uses

Feed-grade grits and hominy feed are rich in carbohydrates and provide readily digestible energy for livestock. Quality standards for feed fractions focus on moisture content (to prevent mold and spoilage in storage), purity (freedom from chemical contaminants and mycotoxins), and consistent nutrient composition to support accurate diet formulation. These products are used in poultry feed, livestock rations for cattle and pigs, and pet food formulations. By-products of maize milling and germ oil extraction are well-suited for inclusion in animal feed, making the feed stream an important part of the economic efficiency of the whole milling operation.

Brewer’s grits

Brewer’s grits represent one of the most technically specific products recovered from maize milling. They are coarsely ground, degerminated endosperm particles produced to precise particle size and compositional specifications for use in beer production. Corn grits are currently the most widely used adjunct in the United States and Canada, valued by brewers as an inexpensive source of fermentable carbohydrates that can partially replace malted barley in the mash.

Why germ removal is critical for brewing

All oil-rich germ must be removed from brewer’s grits because residual corn oil negatively affects both the flavor stability and foam stability of the finished beer. This is a stricter requirement than for food-grade grits. The most desirable brewer’s grits contain less than 1% oil, ash, and fiber, with optimum particle size distribution and high malt extract values. Particle size also matters operationally – a size range that facilitates efficient filtration of the wort is a key specification.

Quality parameters and brewing process

Since maize starch gelatinizes at 62-77ยฐC – above the temperature of typical mash enzyme activity – brewer’s grits require a prior gelatinization step using a cereal cooker before being combined with the barley malt mash. This step ensures the starch is accessible for enzymatic conversion into fermentable sugars. Research published in the Journal of the Institute of Brewing found that adding corn grist at 10-20% of the grain bill lightens the color of the resulting wort and beer, with the adjunct wort measuring 10.5-11.1ยฐEBC compared to 12.2ยฐEBC for an all-malt wort. Maize grits and rice are two of the more widely used brewing adjuncts globally, functioning as efficient starch sources that cause no problems with proteins or beta-glucans – unlike some other cereal adjuncts.

Brewing applications beyond beer

Whole ground maize and refined grits are used to produce alcoholic beverages beyond beer, including bourbon whiskey, which by US regulation must be produced from a mash containing at least 51% maize. Maize grits also contribute to the production of non-alcoholic malt-based beverages in some markets.

The overall picture: milling yield and product hierarchy

A well-run maize dry mill produces a spectrum of products from a single stream of grain, with each fraction directed to its highest-value application. The major advantages of maize dry milling are lower energy use in fractionation and lower capital costs compared to wet milling. The flaking grits command the highest price, followed by food-grade grits, brewer’s grits, soji, and maize flour in descending order of value. Feed-grade fractions recover value from material that would otherwise be wasted. It is estimated that 165 million bushels of maize are dry-milled per year, with the bulk going to animal feed, brewing, and breakfast cereal production.

The germ recovered during degermination is not wasted either. Dry-milled germ can be pressed or solvent-extracted to recover valuable corn oil, which is used in cooking and as an ingredient in some margarines. This complete utilization of the kernel – endosperm into multiple food and feed fractions, germ into oil – is what makes maize dry milling such an economically efficient operation.

What do you think? Given that brewer’s grits require far stricter germ removal than food-grade grits, how might a miller balance production efficiency with the different quality thresholds demanded by food manufacturers versus breweries? And as demand for gluten-free products continues to grow, do you think maize flour will displace wheat flour in more mainstream baking applications, or will its functional differences always limit its use to niche markets?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://en.wikipedia.org/wiki/Dry_milling_and_fractionation_of_grain
  2. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/dry-milling
  3. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/corn-grits
  4. https://www.zolvit.com/fssai/food-categories/cereals-and-grains
  5. https://en.wikipedia.org/wiki/Grits
  6. https://www.alibaba.com/showroom/semolina-flour-of-maize.html
  7. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/semolina
  8. https://www.ulprospector.com/en/eu/Food/Detail/15473/367546/Maize-Semolina–Extruded
  9. https://www.sciencedirect.com/topics/food-science/corn-flour
  10. https://www.alibaba.com/product-insights/is-maize-corn-flour-gluten-free.html
  11. https://pmc.ncbi.nlm.nih.gov/articles/PMC8392023/
  12. https://onlinelibrary.wiley.com/doi/full/10.1002/jib.115
  13. https://www.kerry.com/markets/food-and-beverage-applications/beverage/alcohol/beer-brewing-ingredients/high-adjunct-brewing

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Milling of Wheat, Maize and Coarse Grains

1 Milling Machines-1

  1. Loading and Unloading System for Food Grains in Bulk
  2. Mobile Pneumatic Unit
  3. Pneumatic Unloading
  4. Mechanical Unloading
  5. Auto Grain Weigher
  6. Cleaning Equipments
  7. Sieving Machines
  8. Separators-Types, Magnetic, Dry Destoner; Trieurs, Carter Disc

2 Milling Machines-2

  1. Functions, Construction, Merits And Demerits of Disc Cylinder Separator & Trieur Battery
  2. Introduction, Construction, Working Principles, Functions, Merits and Demerits of Weinhold System
  3. Washing, Rinsing And Whizzer Systems
  4. Combined Washing Machine and Whizzer
  5. Functions, Merits And Demerits of Water Addition System
  6. Water Mixing Systems
  7. Construction, Working and Functions of Horizontal Scourer and Vertical Scourers

3 Different Types of Mills

  1. Horizontal Stone Mills-Construction and Working Principle
  2. Vertical Stone Mills-Construction and Working Principle
  3. Roller Mills-Construction and Working Principle
  4. Various Arrangements of Rolls in a Roller Mill
  5. Advantages of Roller Mills over Stone Mills

4 Detachers and Bran Finishers

  1. Why a Detacher?
  2. What is a Detacher?
  3. Construction of First Detacher Models
  4. Different Detachers
  5. Merits/Demerits of Detachers
  6. Principles of Operation of Bran Finishers
  7. Type of Bran Finishers
  8. Horizontal Bran Finisher
  9. Vertical Bran Finisher

5 Sitters and Purifiers

  1. Evolution and Development in Sifters
  2. Definition of a Plan Sifter and the Various Types
  3. Balancing of Sifter
  4. Drawer – Type Sifter
  5. Square Sifter
  6. Merits / Demerits of Sifters
  7. Junior Square Sifter
  8. Centrifugal Sifter
  9. Turbo Sifter
  10. Break Pre-sifter
  11. Principle of Operation of Purifier
  12. Construction of Purifier
  13. Different Type of Purifiers
  14. Specific Purifier Width

6 Wheat Reception

  1. Testing Of Raw Materials
  2. Appearance
  3. Moisture
  4. Hectoliter Weight
  5. Intake and Precleaning
  6. Intake by Lorry, Rail or Water Ways
  7. Precleaning
  8. Flow Sheet Symbols
  9. Flow Sheet of Intake and Precleaning
  10. Storage of Wheat
  11. Respiration of Wheat
  12. Storing In Sheds or Silos

7 Milling of Wheat – Cleaning

  1. First Cleaning
  2. Crop Yields
  3. First Cleaning Flow Sheet
  4. Water Addition Calculation
  5. Dampening and Conditioning of Cleaned Wheat
  6. Flow Sheet – First Cleaning Diagram
  7. Second Cleaning
  8. The Pre-Break Cleaning Section
  9. Flow Sheet – Second Cleaning
  10. Grinding of Offals

8 Milling of Wheat – Grinding

  1. Grinding Rolls – Grooved, Polished, Matt
  2. Break System
  3. Reduction System
  4. Roll Surface

9 Milling of Wheat – Flow Sheet

  1. Sieving Materials
  2. Sifting
  3. Sieve Surface
  4. Purification
  5. Sizing
  6. Bran Finishing
  7. Flake Disruption

10 Conveying System – Mechanical

  1. Screw Conveyor
  2. Chain Conveyor
  3. Belt Conveyor
  4. Oscillating Tube Conveyor
  5. Bucket Elevator

11 Conveying System – Pneumatic

  1. Differences between the Pneumatic Pressure and Pneumatic Suction System
  2. Pneumatic Pressure Transport
  3. Pneumatic Suction Transport System in the Grinding Section
  4. Types of Pneumatic Conveying Systems
  5. Fans: Efficiency and Power Consumption

12 Characteristics and Chemistry of Coarse Grains

  1. Production and Their Present Utilization
  2. Grain Morphology and Structure, Special Features of These Grains
  3. Proximate Composition and Nature of Major Constituents
  4. Starch Content-Amylose and Amylopectin
  5. Protein Content, Amino Acid Composition
  6. Oil Content, Lipase and Role in Keeping Quality
  7. Constituents from Bran Fraction

13 Refining of Coarse Grains

  1. Need and Concept of Milling
  2. Debranning- Principles of Producing Refined Flours
  3. Simple Grinding and Sieving
  4. Concept of Moistening, Grinding and Sieving
  5. Equipments Used in Debranning
  6. Flow Diagrams for Refining
  7. Significance of Crude Fibre and Ash Content in Refining

14 Processing of Maize

  1. Importance of Germ Recovery in Maize Milling
  2. Processing of Maize
  3. Tempering – Degerming Process for Recovery of Germ and Other Fractions
  4. Flow Diagram of Dry Milling Process
  5. Indigenous Milling System for Maize
  6. Comparison of Imported and Indigenous Milling Systems
  7. Milled Products Recovered From Maize
  8. Wet Milling of Maize for Recovery of Starch and Protein

15 Coarse Grains – Value Added Products

  1. Meaning of Value Addition
  2. Value Added Products
  3. Factors Contributing to Quality Assurance
  4. Bureau of Indian Standards
  5. Export Promotion
  6. PFA
  7. Consumer Protection Act