Every time you pick up a packaged meat product off a supermarket shelf, there’s a legal framework quietly working in the background to ensure what’s inside is safe, properly identified, and fit for consumption. In India, one of the most foundational pieces of that framework is the Meat Food Products Order (MFPO), 1973. Enacted under the Essential Commodities Act, 1955 and brought into force on July 15, 1975, the MFPO set precise packaging specifications that every licensed meat manufacturer must follow – from the type of container used, to what must be printed on its label.

Table of Contents

What the MFPO, 1973 governs

The MFPO is a comprehensive regulatory order administered by the Ministry of Food Processing Industries. Its scope is broad: it covers meat derived from ovines (sheep), caprines (goats), suillines (pigs), bovines (cattle and buffalo), poultry, and fish. Beyond just slaughter and processing, the order specifically addresses packing, marking, and labeling provisions for containers of meat products, alongside sanitation standards and permissible limits for additives and contaminants.

All manufacturers engaged in producing, packing, repacking, or relabeling meat food products for commercial sale must hold a valid license under the MFPO. Restaurants, hotels, snack bars, and other establishments that prepare meat for immediate on-site consumption are exempted. The packaging specifications outlined under the Fourth Schedule of the order apply directly to all licensees.

Container requirements under the MFPO

The MFPO is very specific about what kind of containers can be used for packaging meat products. The core principle is that all containers must be sanitary – meaning they must be manufactured, stored, and handled in ways that prevent contamination at every stage before use.

Tin-plated cans with internal lacquering

For canned meat products, the MFPO specifies that tin-plated steel cans with internal lacquering are the standard container type. This isn’t arbitrary – tin plating creates an effective barrier against oxygen and moisture, both of which accelerate spoilage in high-protein foods like meat. The internal lacquer layer adds a second line of defense: it prevents the metal surface from reacting directly with the meat or its juices, which are often acidic or brine-based.

The regulation further specifies that the lacquer used shall be sulphur resistant and shall not be soluble in fat or brine. For specific products like pork luncheon meat, cans must be coated internally with an edible lacquer that meets these chemical resistance standards. This requirement directly protects against metallic taste transfer and ensures no harmful substances migrate into the meat.

Food-grade materials

Beyond tin cans, all packaging materials used under the MFPO must be food-grade. This means the materials must be approved for food contact and must not leach harmful substances into the product. Packages must also be durable enough to withstand handling during distribution and properly sealed to prevent contamination. Whether rigid metal cans or flexible wrappers, the material selection must prioritize both physical integrity and chemical safety.

Storage and handling of packaging materials

A requirement that often gets overlooked is the MFPO’s mandate on how packaging materials themselves must be stored before use. It is not enough to procure good-quality containers – they must remain uncontaminated all the way to the point of use.

Packaging materials must be kept in clean, dry storage environments, protected from moisture, dust, and physical damage. The regulation recognizes that even high-quality packaging materials can become vectors for contamination if improperly stored. Containers that are damp, dusty, or physically deformed before use can compromise the final product’s safety and shelf life. Facilities must follow proper receiving and inspection protocols for all incoming packaging materials, rejecting any that show signs of contamination or damage.

Inventory management also plays a practical role here. Materials must be used on a first-in, first-out basis, ensuring that older stock is consumed before newer deliveries. This prevents packaging from sitting in storage beyond its recommended service life, which can affect its structural or chemical integrity.

Processing method requirements linked to packaging

The MFPO’s packaging specifications don’t exist in isolation – they are tightly linked to the processing methods used. According to the order, meat food products are those derived or prepared through methods including drying, curing, smoking, cooking, seasoning, flavoring, and freezing. The packaging used must be appropriate for the processing method applied.

For instance, a product that has been heat-sterilized and packed in hermetically sealed tins must use containers capable of withstanding the sterilization process without deforming or compromising the seal. Similarly, frozen products require packaging with adequate moisture-vapor barrier properties to prevent freezer burn. The processing method directly determines what packaging performance standards the container must meet.

The MFPO implements quality control at multiple stages of meat production, and packaging is treated as one of those critical control points – not an afterthought.

Labeling requirements under the Fourth Schedule

The MFPO’s Fourth Schedule lays down clear rules for what information must appear on the containers of meat food products. These requirements serve two purposes: protecting consumers with accurate product information, and ensuring traceability through the supply chain.

Mandatory information on every label

Every meat product package must include clear product identification describing the meat type, a complete ingredient list including additives and preservatives, accurate net weight, manufacturer name and address, production and expiry dates, storage instructions, the MFPO license number, and applicable nutritional information. Each of these elements serves a distinct function.

The product name must clearly identify the type of meat product using standardized terminology, leaving no room for ambiguity about what the consumer is purchasing. The manufacture date is critical for tracking shelf life and ensuring the product is consumed within safe limits. The manufacturer’s name and address establish accountability – if a quality or safety issue arises, the responsible party can be identified and action taken without delay.

MFPO license number

One labeling requirement unique to the MFPO is the inclusion of the manufacturer’s MFPO license number on the packaging. This detail directly ties every packaged product back to a licensed and inspected facility. It allows inspectors, distributors, and consumers to verify that the product was manufactured under regulated conditions. A product without this number on its label is either non-compliant or produced by an unlicensed entity – both are red flags.

Ingredient and additive disclosure

The MFPO requires that all ingredients, including preservatives and additives, be listed on the label. This is important because the order also sets permissible limits for heavy metals, preservatives, and insecticide residues in meat products. The MFPO administers permissible quantities of heavy metals, preservatives, and insecticide residues for meat products – and labeling transparency is how consumers and inspectors can assess compliance at the point of sale.

Inspection and compliance

The MFPO’s packaging specifications are not self-enforcing. The order establishes a structured inspection regime carried out by qualified veterinary doctors and Meat Food Products Inspectors. The MFPO requires four stages of inspection by qualified veterinary doctors for hygienic production of meat products – these cover ante-mortem and post-mortem stages, in-process physical checks in licensed units, and sampling with laboratory analysis.

Packaging compliance is reviewed as part of in-process and end-product inspections. Inspectors can enter and examine any licensed facility, check packaging materials and stored containers, review labeling against the Fourth Schedule requirements, and take samples for analysis. Non-compliance can result in license suspension or cancellation.

MFPO and its transition to FSSAI

While the MFPO, 1973 was the governing regulation for meat packaging for over three decades, India’s food regulatory landscape underwent a major restructuring with the Food Safety and Standards Act, 2006. This act brought the MFPO and six other food laws under a single regulatory body – the Food Safety and Standards Authority of India (FSSAI). Today, meat businesses are primarily governed by the Food Safety and Standards (Licensing and Registration of Food Businesses) Regulations, 2011.

However, the packaging principles established by the MFPO – food-grade containers, proper material storage, clear and complete labeling – remain embedded in the current FSSAI standards. The MFPO’s packaging framework was not discarded; it was absorbed and built upon. Understanding the MFPO specifications is therefore essential not just for historical context, but for understanding the conceptual foundation of India’s current meat packaging regulations.

Despite these regulatory advances, implementation remains uneven. Approximately 90 percent of India’s fresh meat industry remains in the unorganized sector, operating largely outside formal packaging and labeling oversight. This gap underscores why codified packaging specifications – like those in the MFPO – continue to matter.

What do you think? Given that the MFPO’s packaging requirements were drafted in 1973, do you think they adequately address the needs of modern meat packaging technologies like vacuum packing or modified atmosphere packaging? And how significant is the role of mandatory labeling – specifically the MFPO license number – in building consumer trust in packaged meat products?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://fssai.gov.in/upload/uploadfiles/files/MFPO-1973-Amended-English.pdf
  2. http://files.foodmate.com/2013/files_1161.html
  3. https://foodsafety.institute/food-laws-standards/meat-food-products-order-1973/
  4. http://www.fnbnews.com/FB-Specials/Meat-Food-Products-Order-1973
  5. https://www.scribd.com/document/471876148/Meat-Food-Products-Order-and-Milk-product-order

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Meat Packaging and Quality

1 Packaging and its Importance

  1. Emergence of Plastic Packaging Materials
  2. Science of Food Packaging
  3. Functions of a Food Package
  4. Designing of a Successful Package

2 Packaging Materials

  1. Types of Packaging Materials
  2. Flexible Packaging Materials
  3. Semi-rigid Packaging Materials
  4. Rigid Packaging Materials
  5. Physico-chemical Properties of Packaging Films

3 Retail Packaging, Aseptic Packaging and Bulk Packaging

  1. Retail Packaging
  2. Bulk Packaging
  3. Transport Worthiness of Bulk Containers
  4. Aseptic Packaging

4 Packaging Techniques and Packaging of Different Types of Meat

  1. Vacuum Packaging
  2. Modified Atmosphere Packaging (MAP)
  3. Packaging of Fresh Meat
  4. Packaging of Frozen Meat
  5. Packaging of Cured Meat
  6. Packaging of Cooked Meat Products
  7. Packaging of Dehydrated Meat
  8. Packaging Specification as per MFPO, 1973

5 Importance of Sensory Evaluation

  1. Meaning of Sensory Evaluation
  2. How Sensory Evaluation is Different from Organoleptic Evaluation?
  3. Need for Sensory Evaluation in Processed Meat Products
  4. Applications of Sensory Evaluation
  5. Knowledge of Product Characteristics – An Essential Requirement
  6. Types of Sensory Panels
  7. Who can become a Sensory Panelist?

6 Testing Conditions and Sensory Parameters

  1. Sensory Evaluation Room
  2. Preparation of Meat Samples
  3. Number and Presentation of the Samples
  4. Time for Sensory Evaluation
  5. Sensory Attributes/Parameters
  6. Flavour
  7. Texture and Tenderness
  8. Appearance and Colour
  9. Juiciness
  10. Overall Acceptability of a Meat Product
  11. Conduct of Sensory Panel

7 Selection and Training of Panelists, Ranking and Hedonic Scale

  1. Selection of Panelists
  2. Training of Sensory Panelists
  3. Difference Tests
  4. Descriptive Tests
  5. Ranking Test
  6. Hedonic Scale

8 Introduction to Hygiene, Food Safety and Quality Assurance

  1. Role of Hygiene in Production of β€˜Clean and Safe’ Meat
  2. Food Safety
  3. Quality Assurance in Meat and Meat Products

9 Plant Sanitation and Meat Regulations

  1. GMPs, SSOPs and HACCP Systems in Meat Plant
  2. Cleaning and Sanitation in Meat Plant
  3. Standards for Meat Industry and Meat Regulations

10 Carcass/Product Sanitation

  1. Microbiological Spoilage of Meat, Poultry and Eggs
  2. Product Sanitation