Every food product you pick up from a store shelf has been through a careful selection process – not just of ingredients, but of packaging. The packaging material surrounding a food item is its first line of defence against spoilage, contamination, and quality loss. Whether it is a bag of chips, a bottle of juice, or a can of preserved vegetables, the properties of the packaging material directly determine how long the product stays safe, fresh, and appealing. Understanding these properties is essential for anyone working in food processing or food technology.

Table of Contents

Why packaging properties matter in food preservation

Food is a perishable commodity. From the moment it is processed and packed, it faces threats from moisture, oxygen, light, microorganisms, and temperature fluctuations. The role of packaging is to create a controlled environment that minimises these threats. Barrier properties – the ability of a material to resist the passage of gases, moisture, aromas, and light – are among the most critical factors that determine the effectiveness of any food package. Without adequate barrier performance, even the best-processed food will deteriorate rapidly, losing nutritional value, flavour, and safety.

The key properties that food scientists and packaging engineers evaluate include moisture resistance, gas permeability (especially oxygen and carbon dioxide transmission rates), light protection, mechanical strength, chemical inertness, thermal stability, and sealability. Each food product has unique requirements, and choosing the right packaging material means matching these properties to the product’s specific vulnerabilities.

Barrier protection: the core of food packaging

Barrier protection refers to how well a packaging material blocks external elements from reaching the food inside. The main factors that need to be controlled are moisture, oxygen, light, and aroma compounds.

Moisture barrier

Moisture control is critical for both dry and wet food products. Dry products like crackers, biscuits, and powdered milk need packaging with a very low water vapour transmission rate (WVTR) to maintain crispness and prevent caking. On the other hand, fresh produce requires controlled moisture transmission to avoid condensation buildup inside the package, which can accelerate microbial growth. Materials like aluminium foil and certain polymer films such as polyethylene (PE) and polypropylene (PP) offer strong moisture resistance.

Oxygen barrier

Oxygen is one of the primary causes of food deterioration. It accelerates oxidation of fats and oils (leading to rancidity), degrades vitamins, and promotes the growth of aerobic spoilage microorganisms. The oxygen transmission rate (OTR) of a packaging material measures how quickly oxygen passes through it. Metals and glass are essentially impermeable to oxygen, while plastics vary widely. High-barrier polymers like ethylene vinyl alcohol (EVOH) and polyvinylidene chloride (PVDC) are commonly used to enhance the oxygen barrier of flexible packaging films.

Light barrier

Ultraviolet and visible light can cause photodegradation of light-sensitive nutrients such as riboflavin, vitamin A, and vitamin C. Light exposure can also cause off-flavours and discolouration in dairy products, oils, and beverages. This is why milk is often packaged in opaque containers and cooking oils in dark-coloured bottles. Materials like metal cans and aluminium foil provide complete light protection, while coloured glass and pigmented plastic films offer partial protection.

Aroma barrier

Certain foods have strong aromas that need to be retained inside the package, while others need to be protected from absorbing external odours. Aluminium foil and metallised films excel at aroma retention, making them popular choices for packaging coffee, spices, and snack products.

Packaging materials and their properties

Different food packaging materials bring different strengths and limitations. The choice depends on the product type, desired shelf life, processing method, and cost considerations.

Metal cans

Metal packaging – primarily tinplate (tin-coated steel) and aluminium – offers the longest shelf life among all packaging materials. Metal cans are effectively impermeable to gases, moisture, light, and odours, making them ideal for products like canned vegetables, fruits, meat, and fish. Aluminium’s high purity grades are preferred for many food applications due to their corrosion resistance, which comes from a thin oxide film that forms rapidly on exposed surfaces. Aluminium is also lightweight, easy to form into hermetically sealed cans, and can be used in foil laminates for pouches, sachets, and trays.

One drawback of metal cans is the potential for corrosion, especially when acidic foods are packed without proper lacquer coatings. However, modern lacquering techniques have significantly reduced this risk.

Glass bottles and jars

Glass has long been a preferred material for food packaging because of its chemical inertness, non-toxic nature, and excellent barrier properties. It does not react with food, provides a complete barrier against gases, moisture, and odours, and can be reused or recycled. Coloured glass (such as amber or green) adds UV protection for light-sensitive products like beer, oils, and certain juices.

The main weakness of glass packaging lies in its closure. While the glass itself is an excellent barrier, a poorly designed or improperly applied cap, lid, or cork can compromise the entire package’s protective performance. Glass is also heavy and fragile, which increases transportation costs and breakage risk.

Plastic containers and films

Plastics dominate modern food packaging due to their flexibility, lightweight nature, low cost, thermal stability, and wide range of available properties. Common food-grade plastics include polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), and polystyrene (PS).

However, a single plastic polymer rarely provides all the barrier properties needed for food preservation. The permeability of any plastic film depends on factors such as crystallinity, molecular orientation, thickness, and external conditions like temperature and humidity. This is why multi-layered, laminated, coextruded, and metallised films are widely manufactured. These combinations bring together the specific strengths of each layer – for example, PET for rigidity, aluminium foil for gas and light barrier, and PE for heat sealability.

Paper and paperboard

Paper and paperboard are used extensively for secondary packaging (boxes, cartons, wraps) and sometimes for primary packaging of dry goods. On their own, they offer poor barrier properties against moisture, gases, and grease. However, when laminated or coated with PE, aluminium, or wax, they become effective packaging materials. The classic Tetra Pak carton – widely used for milk and juices – is a laminate of paperboard, polyethylene, and aluminium foil, combining structural strength with excellent barrier performance.

Laminates and multi-layer films

Since no single material provides all required properties, laminates are the standard in modern food packaging. A typical laminate might combine paper for stiffness and printability, aluminium foil for gas, moisture, and light barrier, and polyethylene for heat sealability. These composite structures are tailored to the specific needs of each food product, providing far better protection than any single material alone.

Innovative packaging technologies for shelf life extension

Beyond material selection, several advanced packaging technologies play a significant role in extending the shelf life of food products. These technologies combine specialised materials with controlled processing conditions.

Retort packaging

Retort packaging uses flexible pouches made from a laminate of plastic and metal foils. The food is sealed inside the pouch and then heated to 116-121 °C for several minutes under high pressure in a retort or autoclave. This thermal process kills all common spoilage microorganisms, including Clostridium botulinum, making the food commercially sterile. The retort pouch was originally developed for military rations by the United States Army and has since become widely used for ready-to-eat meals, pet food, seafood products, and baby food.

Retort pouches typically consist of layers of PET (for rigidity and gloss), nylon (for puncture resistance), aluminium (for gas barrier), and cast polypropylene or polyethylene (for heat sealability). These pouches offer shelf lives of one to two years without refrigeration, are lighter than metal cans, and require less energy to produce. Their flat profile also allows faster and more uniform heat penetration compared to cylindrical cans.

Aseptic packaging

Aseptic packaging takes a different approach from retort processing. Here, the food product and the packaging material are sterilised separately, and then the product is filled and sealed in a sterile environment. The food undergoes rapid high-temperature-short-time (HTST) processing, which destroys harmful microorganisms while preserving more of the food’s nutritional value, colour, and flavour compared to the prolonged heating in retort processing.

Aseptic packaging is commonly used for liquid and semi-liquid products like milk, fruit juices, soups, and sauces. The packaging material typically consists of layers of paperboard, polyethylene, and aluminium foil. Because the food is processed before filling, aseptic packages can use lighter materials than retort pouches. This technology has made it possible to store products like UHT milk at room temperature for months without preservatives.

Vacuum packaging

Vacuum packaging removes air from the package before sealing. By creating an oxygen-deficient environment, it significantly slows down oxidation reactions, prevents the growth of aerobic spoilage bacteria, and reduces moisture loss (product shrinkage). Vacuum packaging combined with refrigeration is one of the most effective methods currently used for extending the shelf life of fresh meats, cheeses, and processed deli products.

The packaging material used for vacuum packing must have very low oxygen permeability to maintain the vacuum over the product’s shelf life. Common materials include multi-layer films with EVOH or PVDC barrier layers. While vacuum packaging is highly effective, it can sometimes affect the appearance of certain products – for instance, fresh red meat loses its bright colour in the absence of oxygen, though the colour returns upon exposure to air.

Modified atmosphere packaging (MAP)

Modified atmosphere packaging replaces the normal air inside a package with a carefully controlled mixture of gases – typically nitrogen (N₂), carbon dioxide (CO₂), and sometimes oxygen (O₂) in specific proportions. The gas composition is tailored to the particular food being packaged. For example, fresh red meat may use high oxygen levels (~80%) to maintain its bright colour, while bakery products might use CO₂-rich atmospheres to inhibit mould growth.

CO₂ is the most active component in MAP – it dissolves in the food’s moisture to form carbonic acid, creating an environment that suppresses microbial growth. Nitrogen serves primarily as an inert filler gas to prevent package collapse. MAP can extend shelf life by two to five times compared to conventional packaging, depending on the product and storage conditions.

For MAP to work effectively, the packaging material must provide an adequate barrier to gas exchange. If the film is too permeable, the modified atmosphere will equilibrate with external air and the benefits will be lost. For respiring products like fresh fruits and vegetables, however, the film’s permeability is deliberately selected to allow a controlled exchange of oxygen and carbon dioxide, maintaining optimal atmospheric conditions inside the package through passive modification.

Mechanical and thermal properties

While barrier properties get the most attention, mechanical and thermal properties of packaging materials are equally important in practical applications.

Mechanical strength – including tensile strength, puncture resistance, and tear resistance – determines whether the packaging can withstand handling during filling, transportation, stacking, and retail display without failing. A punctured or torn package immediately loses its barrier function. Nylon layers in multi-layer films contribute significantly to puncture resistance, while oriented PET provides excellent tensile strength.

Thermal stability is crucial for products that undergo heat processing. Retort pouches must withstand temperatures above 121 °C without delaminating, melting, or releasing harmful substances. Microwave-safe containers need to endure high temperatures without warping. Frozen food packaging must remain flexible at sub-zero temperatures – a material that becomes brittle when frozen may crack and expose the food to freezer burn.

Sealability – particularly heat sealability – is another vital property. A hermetic seal is essential for vacuum and MAP systems to maintain the internal atmosphere. The sealant layer (usually PE or PP) must form a strong, leak-proof bond without requiring excessive temperatures that might damage the food or other layers of the packaging.

Chemical properties and food safety

Packaging materials must be chemically inert and safe for food contact. Migration – the transfer of chemical substances from the packaging material into the food – is a key safety concern. Regulatory agencies like the U.S. FDA and the European Food Safety Authority (EFSA) set strict migration limits for packaging materials in contact with food. Materials must not impart any odour, taste, or toxic substance to the food product.

Glass is considered the gold standard for chemical inertness. Metals require lacquer coatings to prevent corrosion and metal ion migration into acidic foods. Plastics are evaluated for the potential migration of monomers, plasticisers, and additives. Proper selection of food-grade materials and compliance with regulatory standards is non-negotiable in food packaging.

Choosing the right packaging: a balancing act

No single packaging material is perfect for every food product. The selection involves balancing multiple factors – barrier requirements, mechanical performance, processing compatibility, cost, consumer convenience, environmental impact, and regulatory compliance. A high-fat snack food needs excellent oxygen and grease barrier properties. A ready-to-eat meal destined for ambient storage needs a retortable multi-layer structure. Fresh salad needs a breathable film with controlled gas permeability.

The trend toward sustainability is also reshaping material choices. Biodegradable polymers, recyclable mono-material structures, and bio-based coatings are being developed to replace conventional multi-layer plastics, though achieving equivalent barrier performance remains a technical challenge.

What do you think? Given the trade-offs between barrier performance, cost, and environmental sustainability, which packaging innovation do you believe will have the greatest impact on the food industry in the coming years? And how can food processors balance the demand for longer shelf life with the growing pressure to reduce packaging waste?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.newfoodmagazine.com/article/16971/barrier-packaging-materials/
  2. https://pmc.ncbi.nlm.nih.gov/articles/PMC5302388/
  3. https://www.nisshametallizing.com/en/barrier-properties-food-packaging-quick-glance
  4. https://www.tetrapak.com/en-us/solutions/packaging/packages/food-packages/tetra-recart/everything-you-need-to-know-about-carton-packages-and-retorting
  5. https://en.wikipedia.org/wiki/Retort_pouch
  6. https://www.sciencedirect.com/topics/food-science/retort-pouches
  7. https://pmc.ncbi.nlm.nih.gov/articles/PMC4092886/
  8. https://westairgases.com/blog/what-is-modified-atmosphere-packaging/
  9. https://www.fda.gov/
  10. https://www.efsa.europa.eu/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Food Processing and Engineering-Il

1 Principles of Heat and Mass Transfer

  1. Heat Transfer System
  2. Conduction
  3. Convection
  4. Radiation
  5. Overall Heat Transfer Coefficients
  6. Heat Transfer from Condensing Vapours
  7. Heat Transfer to Boiling Liquids
  8. Type of Food for Heat Processing
  9. Heat Penetration
  10. Heat Transfer Characteristics of Food
  11. Devices for Determination of Heat Penetration
  12. Determination of Cold Point in a Food Container
  13. Calculation of Process Time
  14. Factors Affecting Heat Penetration

2 Heat Application

  1. Heat Exchangers
  2. Blanching
  3. Pasteurization
  4. Sterilization
  5. Aseptic Processing and Packaging
  6. Hot Pack or Hot Fill
  7. Microwave and Ohmic Heating

3 Canning of Fruits and Vegetables

  1. Canning Process for Fruits and Vegetables
  2. Canning of Fruits
  3. Canning of Vegetables
  4. Aseptic Canning of Fruit and Vegetable Products
  5. Tin Containers
  6. Spoilage in Canned Fruits and Vegetables

4 Forms of Water in Foods, Sorption and Desorption of Water in Foods and Water Activity

  1. Properties of Water in Solutions
  2. Water Sorption Isotherms
  3. Water Activity and Methods
  4. Effect of Water Activity on Enzyme Reactions
  5. Effect of Water Activity on Non-enzymatic Browning Reactions
  6. Effect of Water Activity on Microbial Growth and Survival
  7. Effect of Water Activity on Packaging and Storage

5 Drying, Dehydration and Evaporation

  1. Drying Phenomena
  2. Factors Affecting Drying
  3. Drying and Reconstitution Ratio
  4. Spoilage of Dried Fruits and Vegetables
  5. Drying Methods and Equipment
  6. Evaporation/Concentration Method and Equipment
  7. Types of Evaporators

6 Chilling

  1. Refrigeration
  2. Determination of Refrigeration Load
  3. Refrigerated Storage of Fruits and Vegetables
  4. Chilling Injury of Fruits and Vegetables
  5. Evaporative Cool Storage System

7 Controlled and Modified Atmosphere Storage

  1. Physiological Basis of Controlled Atmosphere (CA) Storage
  2. Effects of CA Storage
  3. Methods of Creating Modified Atmosphere (MA) Conditions
  4. Commercial Application of CA Storage
  5. Environmental Factors Influencing MA and CA Storages
  6. CA Systems for Transportation

8 Food Irradiation

  1. Ionizing Radiations
  2. Effect of Ionizing Radiation on Nutrients
  3. Radiation Sensitivity of Microorganisms
  4. Effect of Irradiation on Insects
  5. Practical Applications of Food Irradiation
  6. Beneficial Aspects of Food Irradiation

9 Types of By-Products

  1. Handling and Marketing Wastes of Fruits and Vegetables
  2. By-Products from Fruit Processing
  3. Wastes and By-products from Vegetables

10 Utilization of Fruits and Vegetables Processing Wastes for Food, Feed, Fuel and Industrial Products

  1. Fruits and Vegetable Wastes
  2. By-Products from Fruit and Vegetable Wastes
  3. Industrial Products from Fruit and Vegetable Wastes
  4. Animal Feed from Wastes
  5. Pulp Wash, Recovery, and Utilization
  6. Fermentative Utilization of Fruit and Vegetable Waste
  7. Fruits and Vegetables Processing Wastewater Treatment and Utilization

11 Food Fortification

  1. Necessity of Food Fortification
  2. Food Fortification
  3. History of Food Fortification
  4. Advantages of Fortification
  5. Limitations of Food Fortification
  6. Safety of Food Fortification
  7. Methods of Fortification
  8. Fortification of Fruit and Vegetable Products
  9. Fortified Fruit and Vegetable Products
  10. Fortification of Beverages

12 Packaging − Need and Importance

  1. Types of Packagings
  2. Properties of Packaging
  3. Importance of Successful Package

13 Packaging Materials

  1. Glass Containers
  2. Metal Cans
  3. Aluminium Foil
  4. Plastic Materials
  5. Plastic Containers
  6. Collapsible Containers
  7. Composite Containers

14 Packaging Process and Machinery

  1. Packaging of Fresh/ Chilled Fruits and Vegetables
  2. Packaging of Frozen Foods
  3. Packaging of Dehydrated Fruits and Vegetables
  4. Manufacturing of Packaging Materials
  5. Aseptic Packaging
  6. Vacuum and Inert Gas Packaging
  7. Form-Fill and Seal Equipment