If you’ve ever bitten into a bruised apple or wondered about the safety of that apple juice sitting on your shelf, you need to know about patulin. It’s a mycotoxin – a toxic compound produced by fungi – that commonly contaminates apples, pears, and their processed products. Patulin is a significant food safety concern worldwide because it’s heat-stable, water-soluble, and difficult to eliminate once it enters the food chain. Understanding how it forms, what it does to the body, and how to control it is essential for anyone working in food science, agriculture, or food processing.

Table of Contents

What is patulin?

Patulin (chemically known as 4-hydroxy-4H-furo[3,2-c]pyran-2(6H)-one) is a polyketide mycotoxin produced as a secondary metabolite by several fungal species. The most important producer is Penicillium expansum, the fungus responsible for blue mold rot in apples. Other fungal genera capable of producing patulin include Aspergillus and Byssochlamys.

Patulin was first isolated in the 1940s and was initially studied for its antibiotic properties against both Gram-positive and Gram-negative bacteria. It was even trialed as a treatment for the common cold. However, once its toxic effects became apparent, it was reclassified as a mycotoxin in the 1960s due to its acute toxicity in humans.

Patulin appears as a colourless, crystalline compound that dissolves readily in water and organic solvents. Two properties make it particularly problematic in the food industry: it is heat-stable (meaning pasteurisation does not destroy it) and it remains stable under acidic conditions, which is exactly the environment found in fruit juices and ciders.

Where does patulin contamination occur?

Patulin is primarily associated with apples and apple-based products – apple juice, apple cider, apple sauce, jams, and concentrates. In fact, patulin levels in apple products are widely used as a quality indicator reflecting the standard of fruit used in production.

Fruits affected by patulin

While apples are the main source, patulin contamination has been reported in several other fruits. These include pears, cherries, apricots, peaches, grapes, plums, strawberries, blueberries, and bananas. It has also been found in certain vegetables, cereals such as barley, wheat, and corn, and even in some shellfish, where marine strains of Penicillium have been detected.

How does contamination happen?

The fungus Penicillium expansum typically enters fruit through wounds in the skin – caused by insect damage, rough handling during harvest, or natural bruising. Once it colonises the fruit, it causes blue mold decay and simultaneously produces patulin as it grows. The key conditions that promote contamination are warm temperatures and high humidity during storage.

An important point: patulin can be present even in fruit that appears healthy on the outside. Internal mold growth, sometimes caused by insect entry into otherwise intact tissue, can produce harmful levels of patulin without any visible external signs of decay. According to the FAO/WHO Codex Alimentarius code of practice, washing fruit or removing visibly moldy tissue before pressing may not remove all patulin, as some can diffuse into apparently healthy tissue surrounding the rot.

Contamination in processed products

Because patulin is water-soluble, it easily transfers into juice during processing. Once decayed apples enter the juice-manufacturing process, it is very difficult to remove patulin from the final product. Processing steps like homogenisation, pulping, pasteurisation, clarification, and centrifugation can reduce patulin levels to some extent, but they cannot eliminate it completely – especially if the initial contamination level is high. Additionally, alcoholic fermentation destroys patulin, which is why fermented products like cider and perry typically do not contain it.

Health effects of patulin

Patulin exerts its toxicity primarily by reacting with sulfhydryl (thiol) groups in proteins, which inhibits critical enzyme functions in the body. This reactivity stems from its electrophilic chemical nature, allowing it to form bonds with cellular nucleophiles and disrupt normal cellular processes.

Acute toxicity

Short-term exposure to patulin causes gastrointestinal distress – nausea, vomiting, and intestinal disturbances are the most commonly reported symptoms in humans. In animal studies, acute effects also include pulmonary congestion, edema, and neurotoxicity manifesting as convulsions. Studies in rodents have shown decreased body weight, and changes in gastric, intestinal, and kidney function. The oral LD50 in rodent models ranges between 20 and 100 mg/kg body weight.

Chronic and long-term effects

Chronic exposure to patulin is associated with a range of serious health concerns. These include immunotoxicity, immunosuppression, neurotoxicity, genotoxicity, teratogenicity (harmful effects on the developing fetus), and potential carcinogenicity. Animal studies have shown that the liver and kidneys are particularly susceptible to damage from repeated patulin exposure.

Regarding cancer risk, the International Agency for Research on Cancer (IARC) has classified patulin as a Group 3 carcinogen – meaning there is inadequate evidence to classify it as carcinogenic to humans, though animal data raises concerns. The WHO has concluded that patulin is genotoxic based on various study results.

Vulnerability of children

Children are especially at risk because their detoxification systems are not fully developed, and they tend to consume proportionally more apple juice relative to their body weight. This is why regulatory bodies have set stricter limits for patulin in products intended for infants and young children.

Regulatory limits for patulin worldwide

Given the health risks, several countries and international organisations have established maximum permitted levels for patulin in food products.

The WHO recommends a maximum concentration of 50 ยตg/L in apple juice. The Joint FAO/WHO Expert Committee on Food Additives (JECFA) has set a provisional maximum tolerable daily intake (PMTDI) of 0.4 ยตg/kg body weight per day.

The European Union enforces a maximum limit of 50 ยตg/kg in fruit juices and drinks, 25 ยตg/kg in solid apple products, and a much stricter 10 ยตg/kg for products intended for infants and young children. The US FDA has set a guidance level of 50 ยตg/L for apple juice and apple juice concentrates.

In India, the Food Safety and Standards Authority of India (FSSAI) has established a maximum limit of 50 ยตg/kg for patulin in apple juice and apple juice used as an ingredient in other beverages. However, some researchers have pointed out that India currently lacks specific regulatory limits for patulin in other fruit products beyond apple juice, which is an area that needs attention given the growing processed fruit industry in the country.

How to detect patulin in food products

Accurate detection of patulin is essential for regulatory compliance. The primary analytical methods used include High-Performance Liquid Chromatography (HPLC), Liquid Chromatography-Mass Spectrometry (LC-MS), Gas Chromatography (GC), and Thin Layer Chromatography (TLC). Among these, HPLC with UV detection is the most widely used technique in routine food safety testing.

One analytical challenge is that 5-hydroxymethylfurfural (5-HMF), a compound formed during thermal processing of fruit products, has a similar UV absorption profile and retention time to patulin. This can cause peak overlap during chromatographic analysis, making accurate quantification difficult. Newer biosensor-based techniques, including enzyme-linked immunosorbent assays (ELISA), are being developed as rapid screening tools for the industry.

Control measures to reduce patulin contamination

Controlling patulin requires an integrated approach – from the orchard to the processing plant. No single step can eliminate the risk entirely, so a combination of Good Agricultural Practices (GAP) and Good Manufacturing Practices (GMP) is essential.

Pre-harvest practices

The Codex Alimentarius Commission’s Code of Practice (CAC/RCP 50-2003) recommends several pre-harvest measures. These include pruning trees for good air circulation and light penetration, controlling pests and diseases that cause fruit wounds (such as codling moth and canker), and applying fungicides at appropriate times – particularly around petal fall and harvest when wet weather increases rot risk. Removing diseased wood and mummified fruits during the dormant season also helps reduce fungal inoculum in the orchard.

Harvesting and storage

Careful handling during harvest is critical. All fruit with damaged skin, exposed flesh, or visible disease should be rejected at the picking stage. Fruit should be placed in cold storage within 18 hours of harvest and cooled to recommended temperatures within 3-4 days. Maintaining proper controlled atmosphere storage – with low oxygen levels, appropriate temperature, and humidity – significantly slows mold growth. The hygiene of storage warehouses is also crucial, as clean storage rooms with good sanitary conditions greatly reduce the chances of P. expansum colonisation.

Sorting and removal of damaged fruit

Before processing, thorough sorting and removal of all rotten, bruised, or moldy fruit is one of the most effective ways to reduce patulin in the final product. Research has shown that initial water washing followed by hand-removal of damaged fruit can dramatically lower patulin levels. In one study, patulin levels in non-processed fruit dropped significantly after a water treatment step, with further reductions achieved by manually removing rotten and damaged fruit before further processing. However, it’s worth noting that removing visible rot does not guarantee complete elimination, since patulin can migrate into apparently healthy surrounding tissue.

The role of ascorbic acid

Ascorbic acid (vitamin C) has been widely studied as a means of reducing patulin in fruit products. It is already commonly used in juice processing as an antioxidant to prevent browning. Research shows that ascorbic acid can promote patulin degradation, converting it into less toxic breakdown products. One study found that apple juice treated with 0.25% ascorbic acid achieved up to 60% reduction in patulin after six days of incubation at 22ยฐC in the presence of oxygen. Another study found that apple juice with added ascorbic acid showed a 70% decrease in patulin over a 34-day storage period, compared to only 30% reduction in juice without added ascorbic acid.

However, the effectiveness of ascorbic acid depends on several factors – oxygen availability, temperature, concentration of ascorbic acid, and storage duration. Under the low-oxygen conditions typical inside sealed food packaging, ascorbic acid’s ability to degrade patulin is considerably reduced. It’s also important to note that current regulations do not permit the use of chemical agents solely for the purpose of mycotoxin reduction, though ascorbic acid’s dual role as an antioxidant and patulin-degrading agent makes it a practical option in juice processing.

Other processing and decontamination methods

Several additional methods have shown promise in reducing patulin levels. Clarification and filtration of juice can lower patulin content, since the toxin tends to bind with pulp and suspended particles. UV radiation has been approved as a non-thermal method for juice preservation in some countries and can achieve patulin reductions of up to 43% depending on exposure levels. Ozone washing of apples before pressing has also been reported to help control patulin during processing.

Biological methods are gaining increasing attention. These include the use of lactic acid bacteria (LAB) and yeasts, which can adsorb or enzymatically degrade patulin in food products. Fermentation processes naturally destroy patulin, which is one reason why alcoholic cider typically tests free of this mycotoxin. Enzymatic approaches using microbial enzymes to break down patulin are being explored as biopreservative strategies that have minimal impact on juice quality.

Consumer-level precautions

While industrial control measures are essential, consumers can also take steps to minimise their exposure to patulin. Always inspect fresh fruits before eating or cooking – discard any apples, pears, or other fruits that show signs of mold, bruising, or soft rot. Simply cutting away the visibly moldy part may not be sufficient, as the toxin can diffuse into healthy-looking tissue beyond the rot. When buying fruit juices, choose products from reputable brands that follow quality control standards. Homemade juice should be prepared from sound, undamaged fruit only.

For families with young children, this is especially important. Since children consume more apple juice per unit of body weight than adults, even moderate patulin levels in juice can result in relatively higher exposure. Opting for commercially produced juices that comply with regulatory limits provides an added layer of safety.

Why patulin matters for the food industry

Patulin contamination is not just a health issue – it has major economic implications. Contaminated products can be recalled, leading to financial losses and reputational damage for brands. In international trade, differences in regulatory limits between countries can create trade barriers. For instance, India’s maximum limit for patulin in apple juice is 50 ยตg/kg, while the EU applies a stricter 10 ยตg/kg limit for infant food products. Producers exporting to markets with tighter regulations must invest in more rigorous quality control to remain competitive.

The economic burden extends to apple producers as well. In developing countries, fungal pathogens cause up to 50% of fruit product losses during long-term storage, with Penicillium expansum being the most common postharvest pathogen in apples. Effective patulin management is therefore not just about consumer safety – it directly impacts profitability across the fruit supply chain.

What do you think? Given that patulin cannot be fully eliminated through pasteurisation or standard processing, should regulators push for stricter pre-harvest and storage standards rather than relying on post-processing controls? And how can smaller fruit processors in developing countries be supported to meet international safety standards for patulin?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://www.who.int/news-room/fact-sheets/detail/mycotoxins
  2. https://pmc.ncbi.nlm.nih.gov/articles/PMC6267208/
  3. https://www.mdpi.com/2072-6651/10/11/475
  4. https://en.wikipedia.org/wiki/Patulin
  5. https://www.fao.org/input/download/standards/405/CXP_050e.pdf
  6. https://www.frontiersin.org/journals/plant-science/articles/10.3389/fpls.2023.1139757/full
  7. https://www.digicomply.com/blog/patulin-contamination-current-challenges-and-future-developments
  8. https://www.sciencedirect.com/topics/agricultural-and-biological-sciences/patulin
  9. https://fssai.gov.in/upload/uploadfiles/files/Compendium_Contaminants_Regulations_28_01_2022.pdf
  10. https://www.researchgate.net/publication/215872437_Reduction_of_patulin_in_apple_juice_samples_-_Influence_of_initial_processing
  11. https://pubmed.ncbi.nlm.nih.gov/31119557/
  12. https://www.mdpi.com/2072-6651/9/5/157
  13. https://pmc.ncbi.nlm.nih.gov/articles/PMC9956158/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Food Microbiology (CPO)

1 Classification of Microorganisms Important in the Food Industry

  1. Various Types of Microorganisms
  2. Characteristics (Morphological, Cultural, and Physiological) of Various Microorganisms
  3. Bacteria
  4. Molds
  5. Yeasts

2 Factors Affecting Growth and Inhibition of Microorganisms in Food

  1. Hydrogen-Ion Concentration (PH)
  2. Moisture Requirement/Water Activity
  3. Oxidation Reduction Potential
  4. Nutrient Content
  5. Biological Structure
  6. Inhibitory Substances

3 Food Intoxications

  1. Natural Toxins
  2. Mycotoxins
  3. Aflatoxin
  4. Ochratoxin
  5. Patulin
  6. Botulism
  7. Staphylococcal Food Poisoning

4 Bacterial Food Infections

  1. Zoonotic Diseases
  2. Salmonellosis
  3. Escherichia coli gastroenteritis
  4. Bacillus cereus gastroenteritis
  5. Cholera
  6. Vibrio parahaemolyticus gastroenteritis
  7. Shigella dysentery
  8. Campylobacteriosis
  9. Yersiniosis (Yersinia enterolytica infection)
  10. Listeria monocytogenes infection (Listeriosis)

5 Drying – Controlling of Microorganisms

  1. Principles
  2. Mechanisms of Dehydration
  3. Theory of Drying
  4. Importance of Water Activity (aw)
  5. Microorganisms Associated with Dried Foods
  6. Microbiology of Dried Foods
  7. Survival of Microorganisms in Dried Foods
  8. Microbial Spoilage of Dried Foods

6 Chemicals for Controlling Microorganisms

  1. Use of Various Food Additives and Chemical Preservatives
  2. Types of Additives
  3. Role of Food Additives
  4. Preservatives
  5. Acidulants
  6. Control of Psychotropic Contamination in Food
  7. General Considerations in the Selection of Chemical Food Additives
  8. Developed and Added Preservatives

7 Chemical

  1. Need for Food Preservation
  2. Techniques of Food Preservation
  3. Characteristics of Chemical Preservatives
  4. Classification of Preservatives
  5. Antioxidant Preservatives
  6. Preservatives that Target Enzymes
  7. Preservatives from Natural Products
  8. Traditional Chemical Food Preservatives
  9. Antimicrobial Preservatives
  10. Organic Acids and Esters
  11. Gaseous Chemical Food Preservatives
  12. Nitrites and Nitrates
  13. General Rules for Chemical Preservation

8 Microbial

  1. Microbiological Profile of Harvested Fruits and Vegetables
  2. Sources of Microorganisms on Fresh Fruits and Vegetables
  3. Factors Affecting Type and Number of Microorganism on Fresh Fruits and Vegetables
  4. Human Pathogens Associated with Fresh Fruits and Vegetables
  5. Standards for Water for Human Consumption
  6. Sources of Contaminants in Drinking Water
  7. Contamination Due to Harmful Microorganisms
  8. Microbiology of Canned Fruits
  9. History of Canning
  10. Basic Principle of Canning
  11. Spoilage of Canned Products
  12. Clostridium Botulinum A Major Threat in Canned Products
  13. Microbiological Standards for Processed Foods

9 Spoilage and Associated Chemical/Physical Changes in Food

  1. Principles of Food Preservation
  2. Classification of Foods Based on Perishability
  3. Factors Governing Spoilage
  4. Chemical and Physical Changes Associated with Food Spoilage
  5. Microbiology of Pulses and Grains and Their Products
  6. Spoilage of Processed Pulses and Grains Products
  7. Preventive Measures

10 Thermal Control of Microorganisms

  1. Thermal Preservation of Foods
  2. Heat Preservation Processes
  3. Sterilization
  4. Commercially Sterile Food Products
  5. Pasteurization
  6. Preservation by Moist Heat
  7. Microbiology of Thermally Processed Food

11 Food Borne Diseases

  1. Types of Food Borne Diseases
  2. Human Diseases
  3. Chemical Contamination of Foods
  4. Non-bacterial Microbiological Contamination of Food
  5. Investigation of Food Borne Disease Outbreak