Fish is one of the most perishable foods on the planet. The moment it leaves the water, a race against time begins. Research published in the journal Foods confirms that enzymatic, bacterial, and oxidative processes kick in almost immediately after a fish dies, making rapid temperature reduction critical for preserving quality and safety. Chilling – the process of bringing fish temperature down close to 0 ยฐC – does not stop spoilage entirely, but it slows it dramatically, buying valuable time to move the product from boat to consumer. In this post, we break down the most effective chilling methods used across the fishing and seafood processing industry.

Table of Contents

Why chilling fish matters

Fresh fish has a high water content (typically 70-80%) and a delicate protein structure, making it an ideal environment for rapid microbial growth and enzymatic breakdown. At room temperature of 20-25 ยฐC, fish can become inedible within 8-12 hours. By contrast, the Food and Agriculture Organization (FAO) notes that properly iced fish stored at 0 ยฐC can maintain acceptable quality for significantly longer – up to 14 days or more for some species. The goal of chilling is to reduce the fish temperature to near the melting point of ice (0 ยฐC) as quickly as possible. At this temperature, bacterial multiplication slows considerably, enzyme activity drops, and the fish retains its firm texture, bright appearance, and fresh flavour.

Chilling with ice: the most common method

Ice has been used to preserve fish for well over a century, and it remains the most widely used chilling medium worldwide. According to the FAO, ice is favoured in fisheries because it is affordable, portable, widely available, and effective. When fish comes into direct contact with ice, several things happen at once that make this method so reliable.

First, the melting ice absorbs heat from the fish, steadily lowering its temperature. The latent heat of fusion of ice – approximately 335 kJ per kilogram – provides a very high cooling capacity. Second, as the ice melts, the resulting cold water washes away slime and surface bacteria from the fish. Third, ice keeps the fish moist, preventing dehydration that would otherwise cause weight loss and deterioration in appearance. Finally, as long as ice remains in contact with the product, the temperature stays at a consistent 0 ยฐC, which no mechanical refrigerator can match as reliably during handling and transit.

Types of ice used in fisheries

Not all ice is created equal. The fishing industry uses several types of ice, each suited to different situations, vessel sizes, and handling requirements.

Block ice is the oldest form of manufactured ice, produced commercially since 1869 according to the FAO. It is made by freezing water in metal cans or moulds immersed in a refrigerated brine bath. Block ice is compact, melts slowly, and is easy to store and transport – all major advantages, especially in remote areas with limited infrastructure. However, it must be crushed into smaller pieces before it can be packed around fish effectively. The long production time (8-36 hours depending on block size) and the manual labour required for crushing are its main drawbacks.

Flake ice is produced by spraying or pouring water onto a refrigerated drum or cylinder. The water freezes into thin sheets (about 2-3 mm thick), which are then scraped off into small, irregular, wafer-like pieces. Flake ice has a larger surface area than block ice, which means heat transfer between fish and ice occurs faster and more efficiently. It is ready to use immediately after production, requires no crushing, and moulds easily around the fish. On the downside, flake ice melts faster than block ice and requires more storage space per unit weight.

Tube ice is formed on the inner surface of vertical tubes and harvested as small hollow cylinders, typically about 50 mm long and 50 mm in diameter. It is hard, transparent, and melts more slowly than flake ice due to its compact shape. Tube ice’s smooth outer surface helps avoid physical damage to delicate fish. However, the particle size can be too large for packing closely around fish, so it is sometimes crushed before use.

Chip ice is a variation of flake ice, produced by freezing water inside a cylinder with an evaporating coil and then pushing it upward with a rotating auger. The resulting ice pieces have an average thickness of 7-8 mm and emerge at about โˆ’0.5 ยฐC. Chip ice offers a good balance between contact surface area and durability.

Slush or slurry ice is a mixture of tiny ice crystals suspended in water, creating a pumpable semi-liquid that can be moved through hoses directly to wherever it is needed. It cools fish extremely rapidly because the small crystals make full contact with every surface of the fish. Slurry ice technology is particularly valued in high-value fisheries such as shrimp, where speed of chilling is critical and physical damage to the product must be minimised.

Chilling in cooled brine (chilled seawater)

For large fishing vessels handling massive catches – particularly purse seiners hauling in tonnes of pelagic fish like sardines, mackerel, or herring – packing individual fish in ice is simply impractical. This is where chilled seawater (CSW) and refrigerated seawater (RSW) systems come in.

In a CSW system, seawater in the vessel’s hold or tanks is cooled by adding ice. Fish are then immersed in this cold water mixture. Because saltwater has a lower freezing point than fresh water (approximately โˆ’1.5 ยฐC to โˆ’2 ยฐC), the cooling medium can reach temperatures slightly below 0 ยฐC while remaining liquid. This enables faster and more uniform cooling compared to packing in ice alone. The FAO notes that CSW and RSW systems offer the advantage of quick chilling, reduced physical damage to fish, and quicker handling with less labour.

RSW systems work similarly, but instead of relying on ice to chill the seawater, they use an on-board mechanical refrigeration plant. This gives the crew more precise temperature control over long fishing trips. However, RSW requires a dedicated power plant, pumps, piping, and filters – making it a significantly more expensive setup.

One concern with both CSW and RSW systems is salt uptake. Fish immersed in saltwater can absorb some salt, slightly altering their flavour profile. For fish that will be processed rather than sold as fresh whole product, this minor change is generally acceptable. Monitoring immersion time and controlling salt concentration helps manage this issue.

Mechanical freezing

When fish needs to be stored for weeks or months rather than days, freezing becomes necessary. In mechanical freezing, fish is exposed to very cold air (air-blast freezing) or placed on refrigerated plates (contact plate freezing) to bring the product temperature well below 0 ยฐC, typically to โˆ’18 ยฐC or lower.

The speed of freezing matters immensely for quality. Slow freezing allows large ice crystals to form inside the fish’s cells, rupturing cell membranes and causing fluid loss (drip loss) when the fish is later thawed. Research confirms that rapid freezing creates much smaller ice crystals, preserving the cellular structure, texture, and overall quality of the product. Industry best practice calls for reducing the temperature from 0 ยฐC to โˆ’5 ยฐC in two hours or less, as this is the critical zone where protein denaturation is most likely.

Air-blast freezers circulate very cold air at high velocity around the fish. They are versatile and can handle fish of various shapes and sizes. Plate freezers sandwich the fish between two refrigerated metal surfaces, providing faster heat removal but are limited to relatively flat products like fillets or blocks of fish.

Cryogenic freezing with liquid nitrogen

Cryogenic freezing represents the highest-end approach to fish preservation. Liquid nitrogen boils at โˆ’196 ยฐC, and when sprayed onto or brought into contact with fish, it freezes the product almost instantly. Linde, a leading industrial gas supplier, explains that this ultra-rapid freezing creates only microscopic ice crystals, which preserves the natural texture, flavour, and moisture of the fish far better than conventional mechanical methods.

Cryogenic freezing also reduces dehydration losses significantly – sometimes by a factor of five to ten compared to standard air-blast freezers. Because nitrogen is an inert, non-toxic gas, it does not react with or contaminate the food. The resulting product retains its natural colour, nutritional value, and structural integrity when thawed.

The main limitation of cryogenic freezing is cost. Liquid nitrogen is expensive, and the equipment requires specialised handling and safety protocols. For this reason, cryogenic freezing tends to be reserved for high-value seafood products – sashimi-grade tuna, premium fillets, lobster tails – where superior quality preservation justifies the higher processing expense.

Chilling with solid carbon dioxide (dry ice)

Solid carbon dioxide, commonly called dry ice, sublimes at โˆ’78.9 ยฐC – meaning it transitions directly from a solid to a gas without producing any liquid water. This “waterless” characteristic makes dry ice useful in situations where water contamination or leakage is a concern, such as during air transport of fish.

However, dry ice must never be placed in direct contact with fish. The extremely low temperature can cause cold burns on the flesh, damaging the product. It is typically wrapped or placed in compartments within the packaging. The carbon dioxide gas produced during sublimation can also displace oxygen in enclosed spaces, posing a safety hazard to personnel – a factor that requires careful management, especially during air shipment where COโ‚‚ accumulation in aircraft holds is a regulated concern.

Dry ice is most commonly used for shipping high-value fish products over long distances, where maintaining ultra-low temperatures without any meltwater is critical. It is not a practical option for everyday on-board fish handling on most fishing vessels.

Choosing the right chilling method

There is no single best chilling method – the optimal choice depends on several practical factors. The type and volume of fish being handled, the intended end use (fresh market versus processing), the length of the supply chain, available infrastructure, and budget all influence the decision.

For small-scale and artisanal fisheries, ordinary ice – whether block, flake, or slush – remains the most practical and cost-effective option. For large industrial vessels targeting pelagic species, CSW or RSW systems deliver the speed and scale required. For long-term storage, mechanical freezing is the standard, while cryogenic methods serve the premium end of the market where quality is paramount. Dry ice fills a niche role in air freight and specialty logistics.

What matters universally, regardless of method, is speed. The FAO recommends that the time from catching to chilling should be limited to a maximum of three hours. Every minute of delay at ambient temperature accelerates spoilage and reduces the final shelf life and market value of the product.

What do you think? Given that ice-based chilling has been used in fisheries for over a century, what newer technologies do you think could further reduce post-harvest losses in small-scale fishing operations? And in your experience or region, which chilling method is most commonly used – and does it adequately preserve fish quality through the supply chain?

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

References
  1. https://pmc.ncbi.nlm.nih.gov/articles/PMC7760111/
  2. https://www.fao.org/4/y5013e/y5013e04.htm
  3. https://www.fao.org/4/y5013e/y5013e05.htm
  4. https://rinac.com/blog/how-flake-and-tube-ice-can-be-used-in-different-business-operations/
  5. https://www.deepchill.com/insights/slurry-advanced-fish-chilling-and-preservation-technology/
  6. https://www.linde-gas.com/industries/food-and-beverage/seafood/freezing
  7. https://www.mainelobsternow.com/blogs/resources/nitrogen-freezing-seafood-its-a-big-deal
  8. https://www.westairgases.com/blog/cryogenic-food-freezing-materials/

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Fish, Processing, Packaging & Value Addition

1 Introduction to Fisheries

  1. Fish and Fisheries of India
  2. Fisheries Research and Development
  3. Global Fish Production and Utilization
  4. Indian Fish Production
  5. Aquaculture
  6. Marine Fishery Resources
  7. Fishing Harbours and Landing Centres in India
  8. Trade and Export of Fishery Products

2 Composition and Nutrition

  1. Biochemical Composition of Fish
  2. Proteins
  3. Lipids or Fat (Oil)
  4. Others Components
  5. Role of Fish in Nutrition

3 Fish Spoilage

  1. General Causes of Fish Spoilage
  2. Changes Occurring After Fish Death
  3. Major Changes during Spoilage of Fish
  4. Microbial Spoilage and Evaluation
  5. Assessment of Fish Spoilage Through Enzymatic Techniques
  6. Sensory Tests

4 Fish Handling and Chill Storage

  1. Spoilage of Fish and the Need of Chilling Fish
  2. Chilling Methods
  3. Wet Fish Handling
  4. Handling and Transport of Fish
  5. Sanitation and Hygiene
  6. Facilities Needed in Ideal Landing Centres

5 Products of Commerce

  1. Fishery Resources
  2. Fishery Products of Commerce
  3. Fresh Fish Utilization
  4. Frozen Products
  5. Dried and Cured Products
  6. Canning
  7. Value Added and Miscellaneous Products

6 Dried, Cured and Smoked Products

  1. Cured Fish Products in Indian Economy
  2. Traditional Methods and Products of India
  3. Salting
  4. Drying
  5. Microbial Spoilage
  6. Insect Infestations
  7. Packaging and Storage
  8. Smoking

7 Frozen Products

  1. Freezing of Fish
  2. Technology of Freezing Process
  3. Freezing Methods and Equipments
  4. Packaging and Storage of Frozen Fish/Shrimp
  5. Quality Changes During Frozen Storage
  6. Shelf Life of Frozen Products

8 Heat Processed Products

  1. Pasteurized Products
  2. Cook-Freeze Fish Products
  3. Canned Products
  4. Pouched Products

9 Packaging Materials

  1. What is Synthetic Packaging Material?
  2. Retort Pouches
  3. Glass Containers
  4. Metal Cans
  5. Natural Packaging
  6. Paper Board
  7. Cellophanes

10 Types of Packaging Systems

  1. Vacuum Packaging
  2. Modified Atmosphere Packaging (MAP)
  3. Retort Pouch Packaging
  4. Aseptic Packaging
  5. Thermoforming Packaging
  6. Active Packaging

11 Packaging Requirements for Value Added Fish Products and Safety of Packaging Materials for Food Contact Applications

  1. Need and Function of Packaging
  2. Packaging Materials
  3. Packaging Requirements for Value Added Fish Products
  4. Safety Aspects of Packaging Materials
  5. Flexible Packaging Materials
  6. Metal Packaging

12 Value Addition

  1. Need and Importance of Value Addition
  2. Scope and Advantage of Value Addition
  3. Market Trends
  4. Commercial Role of Value Addition
  5. Pre-requisites for Success of Value Added Products
  6. Factors Influencing Value Addition