Tea is one of the world’s most widely consumed beverages, and the foundation of every quality cup lies in how the plantation was established. A well-planted tea field can remain productive for 50 to 100 years – making field planting decisions a long-term commitment with lasting consequences. From preparing the soil to protecting young plants from drought and wind, each step in the planting process directly determines the productivity, sustainability, and longevity of the tea garden.
Table of Contents
- Land preparation: the starting point
- Soil and water conservation measures
- Contour stonewalls
- Drain systems: lateral drains and leader drains
- Stone-paved terraces
- Planting methods and spacing
- Single hedge vs. double hedge planting
- Recommended spacing
- Planting pit preparation and timing
- Mulching after planting
- Protecting young plants from drought and wind
- Drought protection
- Wind protection
- Post-planting monitoring and early management
Land preparation: the starting point
Good tea cultivation begins well before any plant goes into the ground. Land preparation sets the physical and chemical foundation for everything that follows. The process starts with clearing the site – removing existing vegetation, roots, rocks, and debris that could interfere with plant establishment or drainage.
Once cleared, the soil is deep-ploughed or forked to a depth of 45 to 60 cm (18-24 inches). This removes old roots and stones while loosening the soil, allowing young tea roots to penetrate freely and access nutrients. On hilly terrain, the land is either terraced or levelled in sections so that slopes don’t trigger rapid surface runoff during rainfall.
Soil requirements are specific. Tea thrives in deep, loose, fine-textured acidic soils with a pH of 4.0 to 6.5. Fields that previously grew tobacco, vegetables, or potatoes are generally avoided for tea nurseries, as these crops can leave behind soil conditions or pathogens unfavorable to tea. After the physical preparation is complete, the land is often sown with rehabilitation grasses such as Guatemala or Mana, which restore soil structure, add organic matter, and protect the topsoil from erosion during the period before tea plants are established.
Soil and water conservation measures
Most tea-growing regions are situated on hilly or sloping terrain. This makes soil and water conservation not optional, but essential. Without proper conservation structures, heavy rains rapidly strip away topsoil, reduce soil fertility, and undermine plant establishment. Several proven techniques are used to address this.
Contour stonewalls
Contour stonewalls are among the oldest and most effective methods for controlling erosion on tea estates. These walls are built along the natural contour lines of slopes, forming barriers that slow the movement of rainwater downhill. As water slows, it infiltrates the soil rather than washing away the nutrient-rich topsoil layer. The stones used are typically collected during land clearing, making this both an economical and practical solution. Over time, these walls become structural features of the garden, supporting vegetation and contributing to the overall ecosystem of the plantation.
Drain systems: lateral drains and leader drains
A well-designed drain network is critical to managing water flow in tea gardens, particularly during heavy monsoon rains. There are two primary types: lateral drains and leader (main) drains.
Lateral drains are constructed roughly along the contour lines of the field to intercept surface runoff before it picks up speed and causes erosion. According to standard guidance for tea land preparation, lateral drains are typically 45 cm wide and 45 cm deep, maintained at a gradient of 1:120 toward the main drain. The spacing between adjacent lateral drains depends on the slope and average rainfall, ranging from 6 to 12 meters – closer spacing on steeper slopes or in higher-rainfall areas. Importantly, lateral drains must not open directly opposite each other into the main drain, as this can destabilize drain banks and increase erosion at their junctions.
Leader (main) drains collect water from the lateral drains and channel it safely out of the field. These are constructed in a step-wise structure with a reverse slope, and their sides and base are typically paved with stones to resist scouring. Check dams are placed at intervals within leader drains to trap silt carried by runoff. Grass species like Vetiver are planted along the banks to further stabilize them. Leader drains require regular de-silting and cleaning to remain functional.
A field study conducted in the Nilgiris of South India found that contour staggered trenches combined with cover crops of beans reduced surface runoff to as low as 14.6% – significantly lower than conventional farmer practices – highlighting how drain design choices directly affect soil and water retention outcomes.
Stone-paved terraces
On steeper slopes, stone-paved terraces are constructed along contour lines to further reduce the effective gradient of the land. The upper edge of each terrace is built above soil level and slopes slightly toward the hillside to encourage water to seep inward rather than run off the surface. These terraces, combined with contour stonewalls and drains, create a layered system of erosion control that protects the investment in tea cultivation over the long term.
Planting methods and spacing
The arrangement and density of tea plants in the field affect yield, soil cover, ease of management, and long-term productivity. Over time, tea planting systems have evolved from simple square patterns to more efficient hedge systems.
Single hedge vs. double hedge planting
The single hedge system plants tea in single rows along contour lines. It is straightforward to manage and is commonly preferred in some regions, particularly in northeast India. The double hedge system involves planting two rows of tea close together, with a wider gap between each pair of rows. Double hedge contour planting delivers early high yields, better soil conservation, reduced weed growth between rows, and more efficient field operations – making it the preferred approach in many modern tea-growing regions.
According to the ILO’s Myanmar Tea Cultivation and Processing Guide, contour double hedge planting achieves an average plant population of around 7,400 tea plants per acre, which helps maximize early yields while also improving ground cover and minimizing weed pressure.
Recommended spacing
A plant population of 14,000 to 18,000 plants per hectare is considered desirable for high early yield and quick ground coverage. The minimum recommended spacing between plants within a row is 60 cm, and between rows, a minimum of 105 cm is maintained – enough to allow pluckers and field workers to move freely without damaging bushes. Spacing above 120 cm between rows is generally avoided to prevent excessive weed growth in the inter-row space.
Planting pit preparation and timing
Pits measuring 30 x 30 x 45 cm are dug along the marked contour lines. Plants that are 12 to 15 months old are transplanted by carefully removing the polythene sleeves from the nursery bag without disturbing the root ball. Planting should always be timed to coincide with the onset of the monsoon – June to July for southwest monsoon areas, and September to October for northeast monsoon areas – so that soil moisture is adequate during the critical root establishment phase. In Sri Lanka and other year-round rainfall regions, planting is coordinated with the wet season similarly.
Mulching after planting
Mulching is applied immediately after planting and is one of the most important post-planting practices for young tea. Cut grasses – commonly Guatemala grass – are laid around the plants on the soil surface. Approximately 25 tonnes of grass is required to mulch one hectare of newly planted tea.
Mulch performs several functions at once: it conserves soil moisture by reducing evaporation, moderates soil temperature, suppresses weed germination, reduces surface erosion from rain splash, and gradually decomposes to add organic matter to the soil. Keeping the ground covered with prunings, leaf fall, or a mulch whenever possible is a recognized good agricultural practice for sustainable tea production.
One critical caution: mulch should never be placed directly against the collar region (the base of the stem at soil level). Contact with the collar can cause collar rot and other fungal diseases, particularly in humid conditions. A small gap of a few centimeters must be maintained between the mulch layer and the plant stem.
Cover crops such as Crotalaria and Desmodium are also grown between rows in newly planted fields. These cover crops should be lopped before dry weather sets in and used to thatch the soil surface, preventing them from competing with young tea plants for moisture and nutrients during dry periods.
Protecting young plants from drought and wind
The first one to three years after planting are the most vulnerable for tea plants. Their shallow root systems cannot yet access deep soil moisture, and their small leaf area makes them susceptible to desiccation. Two specific threats – drought and wind – require deliberate management during this period.
Drought protection
During dry spells, young plants may need supplemental water. Mud tubes or “etah” tubes can be buried 15 cm deep near each plant at a slanting angle, through which approximately one litre of water per plant can be poured or injected at weekly intervals during dry weather. This targeted approach delivers moisture directly to the root zone without waterlogging the surrounding soil.
Shade structures are another effective drought mitigation tool. Temporary shade from nets or shade trees reduces direct sunlight intensity and lowers the rate of evapotranspiration from young leaves, giving plants time to establish their root systems before being exposed to full sun conditions. Shade trees are commonly used in lower-altitude tea plantations and can also minimize radiation injury, moderate temperature, and provide additional benefits such as nitrogen fixation when leguminous species are selected.
Wind protection
Wind is a serious threat to young tea plants – it physically damages branches, accelerates moisture loss from leaves, and can uproot plants with shallow root systems. Two practices address this directly.
First, plants are staked immediately after planting to prevent wind damage. Staking anchors the plant in place while roots develop sufficient grip in the soil. Second, windbreaks using fast-growing trees or dense shrubs are planted around the perimeter of tea fields, positioned perpendicular to the dominant wind direction. Species like silver oak (Grevillea robusta) are widely used for this purpose. Shade trees planted within the estate also serve as an internal windbreak system – they reduce wind velocity inside the field while simultaneously providing filtered shade, recycling nutrients through leaf litter, and generating additional income as timber.
Post-planting monitoring and early management
Once plants are established, regular monitoring is essential. Watering schedules are adjusted based on weather conditions and plant response. Monitoring nutrient levels in the soil helps prevent deficiencies that may impact plant health, and fertilizer applications begin gradually – typically starting about two months after planting with phosphorus placed at depth, followed by nitrogen and potassium applications scaled upward annually.
Weeding in young tea fields must be done carefully. Manual weeding is generally discouraged because it can damage surface roots and disturb the collar region. Chemical weed control is the recommended approach for young fields once the plants are well established. As the canopy develops and plants begin to shade out weeds naturally, the pressure from weed competition decreases significantly.
Once plants are sufficiently established, centering – the removal of the growing tip while leaving 8 to 10 mature leaves – is performed to stimulate the development of secondary branches. This early training shapes the plant into the broad, flat bush framework that maximizes plucking surface and yield over its productive life. It typically takes 18 to 20 months from planting to reach a regular plucking field stage.
What do you think? Given that tea bushes remain productive for decades, how much weight should growers give to soil and water conservation infrastructure at the time of planting compared to other upfront costs? And with changing rainfall patterns in many tea-growing regions, which drought protection measure – mulching, shade trees, or supplemental irrigation – do you think offers the best long-term return for small-scale tea farmers?
References
- https://web.forbestea.com/about-sri-lankan-tea/73-cultivation-of-tea
- https://indiaagronet.com/indiaagronet/horticulture/CONTENTS/tea.htm
- https://wikifarmer.com/library/en/article/tea-plant-complete-cultivation-guide
- http://tea-land-preparation.blogspot.com/2011/07/land-preparation-for-tea-cultivation_18.html
- https://www.sciencedirect.com/science/article/pii/S2095633915301210
- https://www.ilo.org/sites/default/files/wcmsp5/groups/public/@ed_emp/@ifp_skills/documents/publication/wcms_742461.pdf
- https://teaworld.kkhsou.ac.in/page-details.php?name=Spacing&page=34ccdb19e144219e83680b2bc
- https://www.unilever.com/files/origin/36207ff71b3746ab511b0e235c4a17eeda3a6516.pdf/es_2003_sustainable_tea_good_agricultural_practice_guidelines_for-small-farmers.pdf
- https://www.historyofceylontea.com/pdf-load/Articles/technical-paper1-standards-and-best-practices-on-plantations.pdf
- https://plantvillage.psu.edu/topics/tea/infos
- https://www.agrifarming.in/tea-farming-information
Leave a Reply