When you pick up a packet of frozen fish fillets or a can of sardines from the store, you probably focus on the fish inside – its freshness, species, and nutritional value. But the packaging that wraps around that fish product is just as important to your health. Packaging materials, especially plastics and flexible laminates widely used in the fish industry, can release chemical compounds into the food they contain. This process, known as chemical migration, is a real and well-documented food safety concern. Understanding what migrates, why it migrates, and how regulations keep it in check is essential for anyone involved in fish processing, packaging, or simply consuming fish products.
Table of Contents
- What is chemical migration in food packaging?
- Common contaminants in flexible packaging materials
- Residual monomers
- Plasticizers
- Stabilizers and antioxidants
- Printing inks and adhesives
- Factors that influence migration
- Temperature
- Contact time
- Fat content of the food
- Surface area-to-volume ratio
- Nature of the packaging material
- How migration is tested
- Regulatory framework: keeping migration in check
- Indian regulations
- EU regulations
- US FDA regulations
- Specific concerns for the fish industry
- Steps toward safer packaging
- For manufacturers
- For regulators
- For consumers
- The future of fish packaging safety
What is chemical migration in food packaging?
Chemical migration refers to the transfer of low molecular weight substances from packaging materials into the food product. These substances can include residual monomers, additives, plasticizers, stabilizers, printing inks, and adhesives. When packaging comes into direct contact with fish, these compounds can dissolve into the moisture, fats, or oils present in the food. According to research published in the journal Foods, the extent of this transfer depends on the permeability of the packaging, the chemical makeup of the material, and the nature of the food itself – with fatty and liquid foods absorbing more chemicals than dry products.
Fish products are particularly vulnerable. They contain high levels of moisture, protein, and fat – all of which interact readily with packaging chemicals. Combine this with extended storage periods, freezing and thawing cycles, and sometimes elevated processing temperatures, and you have conditions that actively encourage migration.
Common contaminants in flexible packaging materials
Flexible packaging – including polyethylene films, PVC wraps, and multilayer laminates – is popular in the fish industry for its versatility, light weight, and cost efficiency. However, these materials can harbour several types of potentially harmful substances.
Residual monomers
During the manufacture of plastic polymers, not all monomer units fully react. These leftover molecules, known as residual monomers, can leach into food. Vinyl chloride monomer (VCM), used to produce PVC, is a well-known carcinogen. Styrene, the building block of polystyrene, is another monomer of concern. Acrylonitrile, found in certain barrier films used for fish packaging, can also migrate into fatty foods. Regulatory agencies across the world set strict limits on residual monomer levels in food contact materials to minimise consumer exposure.
Plasticizers
Plasticizers are added to make rigid polymers like PVC flexible and workable. Phthalates, particularly DEHP (di-2-ethylhexyl phthalate), have historically been the most common plasticizers. Research has linked certain phthalates to endocrine disruption and other health effects. A study on vacuum-packed fish fillets found that storage temperature directly affects how much phthalate migrates from the packaging into the fish – higher temperatures mean greater migration. In India, the latest FSSAI regulations cap DEHP migration at 1.5 mg/kg of food.
Stabilizers and antioxidants
Polymers degrade over time due to heat and light. To prevent this, manufacturers add heat stabilizers and antioxidants. These are typically present at 1-2% of the material weight. While they serve an important functional purpose, some of these additives are themselves capable of migrating into food products, especially under high-temperature processing conditions such as retort or hot-fill applications.
Printing inks and adhesives
Multilayer packaging for fish products often involves printed outer layers and adhesive-bonded laminates. Compounds from printing inks and adhesives can migrate through the layers or transfer via a phenomenon called set-off migration – where ink from the outer printed surface of one package transfers to the inner food-contact surface of the next package in a stack. A study of canned fish and laminated film packages found that 12 out of 26 canned fish samples contained chemicals from the can lining, and one laminated film package showed glue migration into the fish.
Factors that influence migration
Not all packaging leaches the same amount of chemicals. Several key factors determine how much migration occurs.
Temperature
Higher storage and processing temperatures accelerate chemical migration. Fish products that undergo thermal processing (canning, retorting) or are stored in warm environments are at greater risk. Research published in the Journal of Food Science confirms that controlling storage temperature is one of the most effective ways to reduce migration from packaging into food.
Contact time
The longer a food product stays in contact with packaging, the more chemicals can transfer. Fish products with long shelf lives – such as frozen fillets or canned fish – face a higher cumulative risk of migration than products consumed shortly after packaging.
Fat content of the food
Many packaging chemicals are lipophilic, meaning they dissolve more readily in fats and oils. Fish products, especially oily species like sardines, mackerel, and salmon, tend to absorb more migrating compounds than lean, water-based foods.
Surface area-to-volume ratio
Products with a large surface area relative to their volume – such as thin fish fillets or small cut pieces – have more contact points with the packaging. This increases the opportunity for chemical exchange. Packaging design and material selection should account for the physical form of the product being packed.
Nature of the packaging material
The chemical composition, thickness, and permeability of the packaging all matter. Multilayer structures with effective barrier layers can significantly reduce migration, while single-layer films made of cheaper polymers may offer less protection.
How migration is tested
Migration testing is a standardised process used to determine whether a packaging material is safe for food contact. It involves exposing the packaging to food simulants – liquids that mimic the properties of different food types – under controlled conditions of time and temperature that replicate real-world use. Common simulants include distilled water (for aqueous foods), acetic acid solutions (for acidic foods), ethanol solutions (for alcoholic or fatty foods), and vegetable oil or isooctane (for high-fat foods like fish).
Advanced analytical techniques such as gas chromatography (GC), liquid chromatography (LC), and mass spectrometry (MS) are then used to identify and quantify the migrated substances. These methods can detect even trace amounts of harmful compounds. In India, migration testing must be conducted in NABL/ILAC-accredited laboratories to ensure accuracy and traceability of results.
Regulatory framework: keeping migration in check
Governments and international bodies have established detailed regulations to ensure packaging materials do not compromise food safety. These regulations typically work on two levels: overall migration limits (OML), which cap the total amount of non-volatile substances that can transfer from packaging to food, and specific migration limits (SML), which restrict individual harmful substances.
Indian regulations
India’s regulatory framework for food packaging safety is primarily governed by the Food Safety and Standards (Packaging) Regulations, 2018, enforced by the Food Safety and Standards Authority of India (FSSAI). Key provisions include:
All plastic packaging materials intended for food contact must pass an overall migration test as per IS 9845, with the total migration not exceeding 60 mg/kg (or 10 mg/dmยฒ) and no visible colour migration. Specific migration limits are also set for individual substances – for example, barium must not exceed 1.0 mg/kg, copper 5.0 mg/kg, and zinc 25.0 mg/kg. The Bureau of Indian Standards (BIS) publishes several relevant standards: IS 9845 for overall migration testing, IS 9833 for permitted pigments and colorants in food-contact plastics, and IS 10171 as a guide for selecting plastics suitable for food packaging.
The regulations also require that printing inks used on food packages conform to IS 15495, and that printed surfaces never come into direct contact with the food product. Newspapers and similar recycled materials are banned from use in food wrapping or storage. In a notable recent development, FSSAI has proposed banning poly- and perfluoroalkyl substances (PFAS) and Bisphenol A (BPA) in food contact materials – two groups of chemicals that have been linked to serious health concerns globally.
EU regulations
The European Union maintains some of the most comprehensive food contact material regulations in the world. EU Regulation (EC) No. 1935/2004 establishes the general framework, while Regulation (EU) No. 10/2011 specifically covers plastics. The EU sets an overall migration limit of 60 mg/kg for plastic food contact materials and maintains specific migration limits for hundreds of individual substances. The European Food Safety Authority (EFSA) regularly reviews and updates safety assessments based on emerging scientific evidence.
US FDA regulations
In the United States, the Food and Drug Administration (FDA) regulates food contact materials under 21 CFR Parts 170-199. The FDA maintains a list of substances approved for food contact use and sets migration limits based on dietary exposure estimates. For vinyl chloride polymers specifically, Section 177.1980 of 21 CFR addresses the conditions under which these materials may be safely used with food.
Specific concerns for the fish industry
The fish processing and packaging sector faces some unique challenges when it comes to packaging safety. Fish products often undergo multiple processing steps – freezing, thawing, vacuum packing, retorting, or modified atmosphere packaging (MAP) – each of which can influence migration behaviour.
Canned fish, for instance, requires internal can linings (usually epoxy-based lacquers) to prevent metal corrosion and off-flavours. These linings have historically contained BPA, which can migrate into the food during thermal processing. Flexible retort pouches, increasingly used as alternatives to cans, combine multiple polymer layers bonded with adhesives – each layer and adhesive presenting its own migration potential.
Vacuum-packaged fish products, while excellent for extending shelf life, maintain continuous close contact between the packaging film and the food surface, maximising the opportunity for chemical transfer over the entire storage period. As the journal Trends in Food Science & Technology notes, even newer bioplastic packaging solutions intended for fish and meat require thorough migration testing, since biopolymers can be less stable than conventional plastics and may require additives that themselves pose migration risks.
Steps toward safer packaging
Ensuring safe packaging for fish products requires action at multiple levels.
For manufacturers
Fish processors and packaging manufacturers should source only food-grade materials that comply with applicable BIS, FSSAI, or international standards. Every batch of packaging material should come with a Declaration of Compliance (DoC) from the supplier, confirming that migration tests have been performed and limits are met. Manufacturers should also match packaging materials to the specific conditions their fish products will face – high-fat products need different material considerations than lean, water-based ones.
For regulators
Regulatory agencies need to keep pace with new materials entering the market, including biodegradable and recycled plastics. The FSSAI’s decision to allow recycled PET for food contact – provided it passes stringent decontamination and testing protocols – is a step in the right direction. Ongoing surveillance and testing of packaging materials in the unorganised sector, where compliance rates have historically been lower, remains critical.
For consumers
Consumers can play a role too. Avoiding reheating food in plastic containers not designed for high temperatures, choosing products from reputable brands that follow packaging regulations, and staying aware of advisories from food safety authorities are all practical steps. When storing fish at home, transferring products from their original packaging into food-safe glass or stainless steel containers can reduce prolonged contact with plastic films.
The future of fish packaging safety
Packaging technology for fish products is evolving rapidly. Active packaging systems that incorporate antimicrobial agents directly into the film are gaining traction – these can actually improve food safety by reducing microbial growth on product surfaces. Smart packaging with time-temperature indicators and freshness sensors is beginning to appear in premium fish products, helping consumers make informed decisions about product quality.
At the same time, the push toward sustainable and circular packaging – using recycled materials, bio-based polymers, and reduced packaging weight – introduces new safety questions that need to be addressed through rigorous migration testing and updated regulations. The goal is to find packaging solutions that protect both the fish product and the consumer, without compromising environmental responsibility.
What do you think? How much attention do you pay to the packaging of the fish products you buy – and do you think current regulations do enough to protect consumers from hidden chemical risks in food packaging?
References
- https://www.mdpi.com/2304-8158/13/19/3125
- https://pmc.ncbi.nlm.nih.gov/articles/PMC11475518/
- https://www.globalseafood.org/advocate/an-examination-seafood-packaging/
- https://pmc.ncbi.nlm.nih.gov/articles/PMC12096275/
- https://www.eurofins.in/food-testing/blog/migration-testing-of-food-contact-materials/
- https://fssai.gov.in/upload/uploadfiles/files/Compendium_Packaging_V_%2002-04-2025.pdf
- https://www.storyboard18.com/how-it-works/fssai-proposes-ban-of-pfas-bpa-in-food-packaging-materials-82481.htm
- https://szoneierfabrics.com/is-vinyl-plastic-approved-for-food-grade-packaging/
- https://www.sciencedirect.com/science/article/pii/S0924224424003364
Leave a Reply