Picture this: the temperature drops, flowers fade, and your honeybee colony huddles together for warmth inside their hive. Outside, there’s no nectar to collect. Inside, the bees are burning through their honey stores just to stay alive. This is when beekeepers must step in with a critical question: do my bees have enough food to survive until spring? Understanding when and how to feed bees, especially during winter, can mean the difference between a thriving colony come springtime and an empty hive.
Feeding bees isn’t just about pouring sugar into their home and hoping for the best. It requires knowing the right ratios, choosing appropriate food types, and using proper feeding methods. Let’s explore how you can support your colonies through the coldest months and beyond.
Table of Contents
- Why do bees need supplemental feeding?
- Understanding sugar syrup ratios
- Spring feeding: the 1:1 ratio
- Fall and winter feeding: the 2:1 ratio
- The importance of using pure white sugar
- Sugar candy: winter’s emergency food
- Making sugar candy
- Choosing the right feeder
- Division board feeders
- Pail or bucket feeders
- Top feeders
- Best practices for winter feeding
- When to stop feeding
Why do bees need supplemental feeding?
In a perfect world, bees wouldn’t need our help. They’re master planners, collecting nectar during abundant seasons and converting it into honey for leaner times. However, several scenarios demand intervention from beekeepers. Early spring starvation is surprisingly common when colonies consume all stored honey before fresh nectar becomes available, often due to adverse weather preventing bee flight.
Winter feeding becomes necessary when natural stores run insufficient. Perhaps you harvested honey late in the season, or maybe a poor nectar flow left your bees short on supplies. A colony of bees requires either stored honey or nectar to survive-without it, they’ll starve within days. When caring for brood, a colony must maintain temperatures of 34-35Β°C, dramatically increasing their energy demands and honey consumption.
Think of supplemental feeding as an insurance policy. It’s not ideal, but it’s far better than losing your colony. The key is recognizing when intervention is necessary and acting before it’s too late.
Understanding sugar syrup ratios
Not all sugar syrup is created equal. The concentration you choose depends entirely on the season and your colony’s needs. There are two primary ratios beekeepers use, and understanding the difference is crucial.
Spring feeding: the 1:1 ratio
During spring, light syrup with equal parts sugar and water mimics natural nectar, stimulating brood production and colony growth. This thinner consistency is similar to what field bees would naturally collect from flowers. Mix one part white granulated sugar with one part water by weight-not volume, as this affects the final ratio. Spring syrup encourages expansion, helping your colony build up population for the main nectar flow ahead.
Fall and winter feeding: the 2:1 ratio
For winter stores, the game changes completely. You need thick syrup with two parts sugar to one part water by weight. Why the difference? Bees must evaporate excess water from syrup before storing it, which requires energy and time. In fall, days are shorter and cooler. A concentrated syrup reduces the work bees must do to process and store it. Less water in the hive also means less moisture problems during winter, when excess humidity can lead to mold or even freeze the colony.
Here’s a practical recipe: mix 16 pounds of sugar (about 36 cups) with one gallon of hot water. This creates enough syrup to raise a hive’s weight by approximately 20 pounds. Use water around 140Β°F to help dissolve the sugar, but never boiling water, as excessive heat can create harmful compounds.
The importance of using pure white sugar
When feeding bees, sugar quality matters more than you might think. White granulated cane or beet sugar is the safest and most cost-effective option. Why not honey? Surprisingly, honey can transmit diseases like American foulbrood, which is fatal to colonies. Honey also fails to stimulate brood rearing the way sugar syrup does, and it costs significantly more.
Avoid brown sugar, raw sugar, or organic sugars that may contain molasses or other additives. These substances can cause digestive issues in bees, manifesting as dysentery. Never use powdered sugar for syrup, as it often contains anti-caking agents like cornstarch. Stick with simple, refined white sugar-what’s unhealthy for humans is actually ideal for bees.
Sugar candy: winter’s emergency food
While syrup works beautifully in moderate temperatures, it becomes problematic in cold weather. Bees won’t break their cluster to access cold syrup when temperatures drop below 50Β°F. This is where sugar candy, also called fondant, becomes invaluable. Placed directly above the bee cluster, fondant provides accessible food without adding moisture to the hive.
Making sugar candy
Creating fondant requires precision but isn’t overly complex. Start with five pounds of white granulated sugar, two cups of water, and a teaspoon of vinegar. The vinegar helps invert the sucrose into glucose and fructose, making it easier for bees to digest. Heat the mixture to 234-240Β°F using a candy thermometer-this is crucial for proper consistency.
Once it reaches temperature, remove from heat and let it cool to around 200Β°F without stirring. Then beat the mixture with a hand mixer until it turns cloudy and white, indicating crystallization has begun. Pour immediately into shallow molds like paper plates or aluminum pie pans. After cooling completely, these candy patties can be placed directly on top frames above the cluster.
The beauty of fondant is its shelf life. You can make batches ahead of time and store them in freezer bags, ready to deploy when a colony needs emergency feeding. Unlike syrup, fondant doesn’t increase hive humidity, reducing the risk of condensation that could freeze and harm the cluster.
Choosing the right feeder
Even with perfect syrup, delivery method matters tremendously. Different feeders suit different situations, and choosing wisely affects both feeding efficiency and colony safety.
Division board feeders
Also called frame feeders, these devices replace one or two frames inside the hive body. They typically hold one to three gallons and sit right next to the brood nest. The advantage? Bees can access food even in cool weather since the feeder is inside their warm cluster area. Modern versions include textured walls and ladder systems to prevent drowning-a serious concern with older designs.
The downside is you must open the hive to refill them, exposing the colony to cold and potentially encouraging robbing. For winter feeding, this limitation makes them less ideal than top feeders.
Pail or bucket feeders
These simple, cost-effective feeders consist of any container with a perforated lid. You fill the bucket with syrup, place it upside down over the inner cover hole, and let vacuum pressure control the flow. An empty hive body surrounds the feeder, topped with the outer cover. Bees access syrup through the inner cover hole, making refills easier than with frame feeders since you only lift the outer cover and empty box.
Friction pail feeders work exceptionally well for fall feeding because they hold large quantities-often two gallons-reducing refill frequency. They’re also relatively inexpensive. Just ensure the lid has enough small holes for adequate flow without flooding.
Top feeders
These purpose-built feeders sit on top of the hive body like an extra box, with reservoirs holding several gallons of syrup. Bees access the food from below through screened openings. Top feeders are among the most popular options because they’re easy to refill without disturbing the colony much, and they hold substantial amounts of syrup. The enclosed design also reduces robbing risk compared to entrance feeders.
Best practices for winter feeding
Timing is everything. Start fall feeding early, ideally when you remove honey supers, not after the nectar flow ends. If you wait too long, nighttime temperatures may drop too low for bees to take syrup. Start feeding during the midpoint of fall flow, allowing bees to process and store the syrup while weather remains favorable.
Feed in the evening when bees are less active and more likely to store food rather than consume it immediately. This timing also reduces robbing risk, as fewer foragers are flying. Always use feeders located inside the hive during fall and winter-entrance feeders invite robbing and become unusable once temperatures drop.
Monitor carefully for robbing, especially when feeding multiple hives. Reduce entrances and consider robbing screens during feeding periods. Never spill syrup around the apiary, as this triggers robbing behavior that can devastate weak colonies.
Keep equipment clean. Fermented syrup containing yeast becomes toxic to bees. Mix only what you’ll use immediately, and clean feeders thoroughly between uses. If you notice fermentation, discard that batch and sanitize the feeder before refilling.
When to stop feeding
Once bees have adequate stores-typically 40-50 pounds for most colonies-stop feeding. You can check by hefting the hive from the back. A full hive feels noticeably heavy. Over-feeding isn’t helpful; it just fills space bees need for brood come spring. Remove any remaining syrup or candy before major nectar flows to prevent contaminating your honey harvest.
What do you think? Have you successfully overwintered colonies using sugar feeding? What feeding methods have worked best in your climate, and what challenges have you faced?
References
- https://www.dpi.nsw.gov.au/__data/assets/pdf_file/0018/532260/Feeding-sugar-to-honey-bees.pdf
- https://www.honeybeesuite.com/sugar-syrup-ratios-which-one-to-use/
- https://www.betterbee.com/instructions-and-resources/the-when-what-and-how-of-fall-feeding.asp
- https://gypsyshoalsfarm.com/blogs/the-bees/feeding-winter-bees-how-to-make-sugar-fondant-candy-boards
- https://www.betterbee.com/instructions-and-resources/betterbee-product-corner-feeders.asp
Leave a Reply